anxromatrix
Newbie
I need help with mypin pid controller here. I need to know if this schematic is good and will work with hot plate. Dyer needs of starting my smoker. Thanks
Hello all, I am currently using a Mypin controller to control a curing chamber, and I have a desire to change the rate at which the controller switches the relay. That is, I do not what the relay to be switched too quickly when the PV becomes close to the SV. Is there a way to change that rate with the Mypin controller software? Based on the Mypin manual, I would assume this is controlled using the "Control Cycle Time" which is one of the parameter settings. According to instructions provided with this forum, this setting is referred to as "Control Type" and "Should not be changed" but the function of the setting is not described and there is no reason given as to why it should not be changed. Thanks in advance.
Would you please explain more about turning off the P and ctl I'm very interested and new.I love the Mypin devices. I find most contain sayno parts. Several builds I have used the Mypin ta4, and just finished one with a ta6. I simply turn off the P and give it a ctl command for lenth of relay hold time and let it auto tun after box is up to temp. The devices that serve a purpose well.