First RF smoker

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

spody3

Newbie
Original poster
Sep 9, 2013
16
10
Building my first RF smoker. Need a few ideas for latches on the fire box. Was thinking of doing 6 inch thick wall pipe from fire box to the CC. Then 4 inch for the exhaust. My fire box is 18" x 18". Here are a few pictures of what I have. I am open to all suggestions. Thanks a lot.
 
Had some time today to work on the bbq/smoker. What you guys think. Still need a few ideas for latches on the door for the fire box.
 
Next Is to build the door and mount my hinges for the fire box then the FB will be complete. Then on to the exhaust chamber and mount my handle on the CC.
 
Did some work today on the bbq. Was able to get my first fire started. Was able to get it about 600 degrees and burnt some nasty stuff out if the CC. Hoping to get some meat on it this weekend. Then ready for paint in the next few weeks. What does everyone think.
 
spoody, evening....  the smoker's lookin' good....     

Just so you know, you can load multiple photos to one post....  Hold the control key, click on the picture links, click OK or SEND or whatever the prompt says.....     

Smoke something up before paint....   Gotta have pics of smoked food you know.....    

Dave
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky