- Aug 29, 2013
- 5
- 10
So, I really like the idea/do-it-yourself-ness/flexibility/customizability of the UDS, so I'm going to attempt one. I think I have the basics - coal basket, air holes around the bottom to control temp, vent hole(s) on top, an ash pan if you want, etc. I do have a couple questions still -
1 - Is the burn out to remove the lining, or to heat the metal and get it used to high temps and prevent warping, etc.?
2 - I've read talk of a diffuser plate - is this totally necessary?
3 - Do the wood chunks just mix in with the coal?
4 - Has anyone done a propane UDS with good success?
5 - Is there a list/post of bare minimums for a UDS? Like a sticky of "The Beginner's Guide to UDS Building"?
Thanks in advance - I appreciate any input.
Dave
1 - Is the burn out to remove the lining, or to heat the metal and get it used to high temps and prevent warping, etc.?
2 - I've read talk of a diffuser plate - is this totally necessary?
3 - Do the wood chunks just mix in with the coal?
4 - Has anyone done a propane UDS with good success?
5 - Is there a list/post of bare minimums for a UDS? Like a sticky of "The Beginner's Guide to UDS Building"?
Thanks in advance - I appreciate any input.
Dave