CAN'T FIND WOOD TO USE FOR SMOKING WITHOUT HARSH CHEMICALS ADDED. I LIVE IN PHILLY PA. ANY SUGGESTIO

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.


A simple 1x1 piece of red oak 12" long was balanced on a blade and it did so very near the center. It then went upright into a tray of water 1" deep. At one hour the balance point had changed considerably. At 10 hours the balance point stopped moving toward the wet end. At 12 hours the balance point was moving back toward the previously dry end. Stabilization took 16 hours and the final balance point was just over 3/4" from the center.

Feel free to repeat the experiment as it takes next to nothing and very little time.
 
Last edited by a moderator:
I'm from Philly...what was the question?
biggrin.gif


 
Originally Posted by S2K9K   [h3]edited post[/h3]
38x38px-ZC-84cf1503_download.jpg


S2K9K
Yesterday at 8:39 pm

Black,
I just wanted to let you know I had to edit one of your posts and delete a link. As per @TulsaJeff and our User Guidelines, offsite links are not permitted to be posted on this forum.
Here is a link to the edited post:

http://www.smokingmeatforums.com/t/139323/stx-turboforce-3000-series-grinder#post_1074283
Thank You for understanding,
Moderator Team
That's OK, edit my posts as you like
Beating_A_Dead_Horse_by_livius.gif
 
 
Last edited:
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky