or Connect
SmokingMeatForums.com › Forums › Announcements › Roll Call › New from NC
New Posts  All Forums:Forum Nav:

New from NC

post #1 of 12
Thread Starter 
Hey guys and gals, new from NC and new to smoking! Been reading and about to start a UDS build here soon, and get some food on there!!
post #2 of 12
Hi Cameron! welcome1.gif to SMF!!! We're happy you found us! You've come to the right place, we have over 50,000 members who just love to share their experience and over 1,000,000 posts describing it! Yea that’s right over 1,000,000!

The search bar at the top can be your best friend when you are trying to find answers to your questions but you can still ask too if you want!

We have an Articles section that is full of great information about smoking to include a lot of recipes and instructionals. Check it out there is a lot to learn in there!

Would you do us a favor and add your location to your profile, it helps others to know where you are when they offer advice, Thanks!

You might want to check out Jeff's Free 5 day E-Course, it will teach you all the basics plus a whole lot more!
post #3 of 12
Welcome aboard Cameron! Glad you joined us. This is a great place to share ideas on our favorite pastimes...smoking and grilling great food! There are lots of friendly and knowledgeable folks here who really enjoy helping one another. Good luck with that UDS build! Any time you can't find the answer you're looking for, just ask and someone here will have the answer.

Red
post #4 of 12

Welcome. You'll love this forum. I just started smoking last fall and had limited success until I found this forum. I have learned so much from the kind members. They are generous with answers to your questions and there are a ton of great ideas in the postings. One of the ways I learned the most was posting my projects with pictures and I always got support, advice and suggestions for differing ways to do things.

 

I am sure you will love this forum as much as I do.

 

Disco

post #5 of 12

Glad you joined the group. The search bar at the top of any page is your best friend.
About anything you wanna know about smoking/grilling/curing/brining/cutting or slicing
and the list goes on has probably been posted. Remember to post a QVIEW of your smokes.
We are all smoke junkies here and we have to get our fix. If you have questions Post it
and you will probably get 10 replies with 11 different answers. That is because their
are so many different ways to make great Q We all have our own taste.

Happy smoken.

David

post #6 of 12

welcome1.gifto SMF!  We are so glad you joined us! There are quite a lot of folks who do use a UDS as their smoker. Go over to that part of the forum and they can help you along the way.  http://www.smokingmeatforums.com/f/199/uds-builds

 

We love to see pictures of what you are cooking (or what we call q-views here at SMF).  To "upload the q-views" just follow the directions here and it will be easier. If you are using a cell phone, an IPad or a kindle, go to the main SMF page and click the Mobile button. Will make the uploads a bit faster too.

 

If you didn't read the "Terms of Service" notes.....please do.  There are a few things that everyone should know about those pesky little rules before plunging into the forums and some guidelines of how to interact within the forums. Off site links are not allowed here at SMF per Jeff. Not that you have done anything wrong....just a little bit of FYI for new members!

 

If you need any help roaming around the forums....just holler!  Happy to help out!

 

Kat

post #7 of 12
Thread Starter 
I have been doing a lot of reading on it all, and now just ready to light some coals and cook some meat! I got a drum, just gotta get it built!
post #8 of 12

welcome1.gif to SMF. Have you joined our NC Smokers group yet. We'd love to have ya.

http://www.smokingmeatforums.com/groups/show/4/north-carolina-members

post #9 of 12

Welcome Cameron! I look forward to seeing pics of your UDS build.

post #10 of 12

Hey Cam.. welcome to SMF and were glad to have you aboard........icon14.gif  I see your from Raleigh.. I live near lake wheeler. If you need any help let me know... I'll shoot you a pm ( private message)  with my #  if you need help with your build... I have all the welding equipemt

 

Boykjo

 

AKA

 

Joe
 

post #11 of 12
Thread Starter 
Thanks boykjo, I have all of it at my brothers house too, and am excited to put it to use! I have seen a lot of people from the RDU area, and thought it would be cool to get some people together to cook and share and just hang out!
post #12 of 12
Ad
Quote:
Originally Posted by alelover View Post

welcome1.gif to SMF. Have you joined our NC Smokers group yet. We'd love to have ya.
http://www.smokingmeatforums.com/groups/show/4/north-carolina-members

Add me in :) I'm in mint hill, but kept my horses in MP for a while :)
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Roll Call
SmokingMeatForums.com › Forums › Announcements › Roll Call › New from NC