or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoking Gadgets and Tools.  › BBQ Guru CyberQ Wifi on Open Range
New Posts  All Forums:Forum Nav:

BBQ Guru CyberQ Wifi on Open Range

post #1 of 6
Thread Starter 

I have recently picked up a CyberQ Wifi from BBQ Guru but not really sure what the best setup would be for my smoker. I have a Open Range Gen II adjustable smoker. I have a few ideas on how I would install and use it but I would like to see others opinions on the best set up.

post #2 of 6

Have you set this up yet? I would like to know how it is working?

post #3 of 6
Thread Starter 
Yes I have it all set up and I love it. I would highly recommend it. I set it up with two bulkhead fittings and two 10 CFM fans. Works great.



Edited by Nyofndremz - 11/25/13 at 1:57pm
post #4 of 6

Thanks for the reply. I'm gonna do the same!

post #5 of 6
Also, how do you start it? Minion ? How much charcoal for a long burn? I've only owned the Open Range a week so I'm definitely still learning.
post #6 of 6
Thread Starter 

I have tried a few different ways and they all work fine. I normal start off with 2 lit chimney full of lump coal and add more lit lump coal as needed later through the smoke.  If you have used the minion method and like you can do it that ways as well. I really like using lump coal compared to briquets. I think they burn better in the smoker but thats is my opinion. The smoker also closes up tight after your done which allows you to reuse the left over coals. 

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Smoking Gadgets and Tools.
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoking Gadgets and Tools.  › BBQ Guru CyberQ Wifi on Open Range