or Connect
SmokingMeatForums.com › Forums › Announcements › Roll Call › Hello from North Carolina
New Posts  All Forums:Forum Nav:

Hello from North Carolina

post #1 of 10
Thread Starter 

I'm Wayne from Mooresville, NC. I have been drag racing for several years but learned I also enjoy cooking, especially anything smoker related. I started with a 2nd hand Weber and then purchased a propane vertical smoker (I know that's like cheating....lol) and really enjoy trying new recipes and techniques. I have lurked multiple threads here and will now be looking for advice and possibly posting a build thread of a reverse flow smoker.I have been working/fabricating on cars for 20 years and have spent the last 12 years in the gas turbine repair industry. I have descent fabricating knowledge and a good metal working skills.I'm sure I have a lot to learn and hopefully can get his beast built in a few weeks.

 

Thanks to everyone that posts and welcomes newbies like myself!

 

Happy Smoking!

 

Wayne

post #2 of 10
Hi Wayne! welcome1.gif to SMF!!! We're happy you found us! You've come to the right place, we have over 50,000 members who just love to share their experience and over 1,000,000 posts describing it! Yea that’s right over 1,000,000!

The search bar at the top can be your best friend when you are trying to find answers to your questions but you can still ask too if you want!

We have an Articles section that is full of great information about smoking to include a lot of recipes and instructionals. Check it out there is a lot to learn in there!

Would you do us a favor and add your location to your profile, it helps others to know where you are when they offer advice, Thanks!

You might want to check out Jeff's Free 5 day E-Course, it will teach you all the basics plus a whole lot more!

What class do you race in?
post #3 of 10

welcome1.gif Wayne

I'm a car nut my selfnxsmile.gif. Take a look at some of the build threads. that will give you some good and bad ideas. I look forward to fallowing your build.

Happy smoken.

driving.gifDavid avatar3972_3.gif

post #4 of 10

Hello Wayne and welcome to the fun.  Many good folk here with a load of experience that they are more than willing to share.  If you have specific questions just start a thread and someone with experience will be along soon to offer advice.  Spend some time doing some research on the forums, tons of advice and recipes already available there.  The trial and error method works well.  We will try to help you keep the errors to a minimum since we already made them for you.  We look forward to your contributions.  Lookin forward to your build.  Have fun.  Good luck.  Keep Smokin!

Danny

post #5 of 10
Thread Starter 

I run a local heads up class called True Street. We run stock suspension and drag radials. I plan to post a couple car pictures shortly. Thanks for the warm welcome.

 

Wayne

post #6 of 10
Thread Starter 

*

*

post #7 of 10
That's totin' them pretty nice for a street car!!!
post #8 of 10

welcome1.gif to SMF!  We are so glad you joined us! Nice Rides!!!!

 

If you didn't read the Terms of Service notes.....please do.  There are a few things that everyone should know about those pesky little rules before plunging into the forums. Rule #11......"Off Site Links are not allowed here at SMF" is something new. There are other simple guidelines for all of us to remember as we interact here.

 

If you need any help roaming around here in SMF....just give me a shout.  Happy to help any time!

 

Kat

post #9 of 10
Welcome to the forums, Wayne! Glad you've joined us. You've found a great place to learn and share ideas on our favorite pastimes...grilling, smoking, and curing great food! There are lots of friendly and knowledgeable folks here who really enjoy helping one another. Just ask any time you need help and you'll get plenty!

Red
post #10 of 10

Welcome Wayne. 

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Roll Call
SmokingMeatForums.com › Forums › Announcements › Roll Call › Hello from North Carolina