or Connect
SmokingMeatForums.com › Forums › Announcements › Roll Call › Hello all, new to SMF
New Posts  All Forums:Forum Nav:

Hello all, new to SMF

post #1 of 4
Thread Starter 
Hey all, from Idaho, been into smokin for awhile now. Never knew a site like this was around !! Have a weber kettle, weber smokey mountain, Bradley 4-rack, barrel smoker and gonna start a project to convert an old fridge into a smoker. Never done anything like that before so if any of you all have any ideas on the conversion for the fridge to smoker I'd be in debt to ya !!
post #2 of 4

Hello and welcome to the fun.  Many good folk here with a load of experience that they are more than willing to share.  If you have specific questions just start a thread and someone with experience will be along soon to offer advice.  Spend some time doing some research on the forums, tons of advice and recipes already available there.  The trial and error method works well.  We will try to help you keep the errors to a minimum.  I have a 1955 fridge waiting to convert.  Look in smoker builds as we have a forum for fridge builds.  You will have better luck with an old fridge as they are usually metal interior.  Have fun.  Good luck.  Keep Smokin!

Danny

post #3 of 4

Welcome to the forums!  Glad you've joined us.  You've found a great place to learn and share ideas on our favorite pastimes...grilling, smoking, and curing great food!  There are lots of friendly and knowledgeable folks here who really enjoy helping one another.  Good luck with that fridge build project and just ask any time you need help and you'll get plenty!

 

Red

post #4 of 4

welcome1.gifto SMF!  We are so glad you joined us! Would you mind updating your profile to show the other SMF members where you are located?  Ya never know you might meet a few new neighbors.

 

Jeff offers a free 5 day E-Course.  It's packed with great information to use...no matter what your experience level might be!  http://www.smoking-meat.com/smoking-basics-ecourse

 

There is a very active part of the forums with Fridges, Freezers and the like.  The guys there will gladly lend a hand and help out. http://www.smokingmeatforums.com/f/198/fridge-freezer-builds

 

If you didn't read the "Terms of Service" notes.....please do.  There are a few things that everyone should know about those pesky little rules before plunging into the forums. http://www.smokingmeatforums.com/a/terms-of-service

 

Off Site Links are not allowed here at SMF....just a gentle FYI! biggrin.gif

 

If you need any help roaming around the forums....just holler!  Happy to help out!

 

Kat

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Roll Call
SmokingMeatForums.com › Forums › Announcements › Roll Call › Hello all, new to SMF