or Connect
New Posts  All Forums:Forum Nav:

Just recieved my new amnps

post #1 of 6
Thread Starter 

After the first burn off, I tried smoking some cheese, cold smoke. I placed the amnps where Todd suggested but I'm  still getting heavy white smoke. Not the tbs that I want. Any suggestions?

,

post #2 of 6
It would help to know what kind of setup you are using the AMNPS in? Make sure that you get it lit really well and let it flame for at least 5 minutes before blowing it out.
post #3 of 6

If the AMNPS is getting a lot of Air it will burn Fast and make lots of smoke. Try to reduce the air it is getting and it will settle down. In my MES I start with the Chip Drawer and Loader 1" out for 15-20 minutes to get 'er going well then shove the Loader all the way in and it makes TBS for the next 10 hours on a full load...JJ

post #4 of 6
Thread Starter 

Thanks for the suggestions. Sorry I forgot to mention that I am using a MES 30. I'll try a little less bottom vent next time.

post #5 of 6

They do put out a good bit of smoke once they are chugging along.

post #6 of 6

  In my MES40 when I first blow out the flame and put it in the smoker it's puffing smoke profusely but after closing the door it settles down fairly quickly.

 

Chuck

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Smoking Gadgets and Tools.