that is a good point.., I am looking to replace mine with on that has a sharpener, You say cabelas? I check it out. They always have quality.
Best Meat Slicer for Bacon and/or Brisket
- Thread starter cman55
- Start date
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
BTW If you can wait till after hunting season/Christmas they all normally have huge discounted sale prices if you know what you want and can act fairly quickly.
LOL and when Cabela's say's the sale ends on the 1'st they ain't kidding, at 12:01 **POOF** its gone!
They are good sales thought, Maybe 30% and sometimes they'll throw in free frt.
Just a heads up, although I doubt you;ll need it.
Last edited:
I don't think this is a hijack, but I have a couple a questions.
I was checking out those Cabelas new "Commercial Grade" slicers and noticed had a disclaimer. These are what I was going to buy earlier this year and they completely sold out. I know nearly everything these days has a disclaimer to get around the idiots, but....... It is very specifically states that the slicers are NOT NSF approved. NSF National Sanitation Foundation, these are the rules concerning human consumables and their supporting products. Potty water (drinking water) pipe for municipalities requires NSF, if its not NSF its not allowed. Everything has rules "Codes" legal requirements for one reason or another, CSA, UL, ASTM, AWWA, NSF, safety if nothing else. I am thinking maybe these might have been made somewhere were there is no accountability for the materials used?
<shrugs> I know that not being NSF doesn't make it a bad slicer, it just hasn't bothered to passed the tests? Just makes me wonder.
Another question, I am old school.... yeah right, go figure....LOL But what ever happened to using HP rating on electrical motors? If I can see one is 1/2 HP, and another is only 1/4 HP, I can understand some price difference. On similar slicers with different HP motors the High or large size motor would last much longer. So why don't manufacturing specs always show the HP rating anymore?
Seriously just wondering.
I was checking out those Cabelas new "Commercial Grade" slicers and noticed had a disclaimer. These are what I was going to buy earlier this year and they completely sold out. I know nearly everything these days has a disclaimer to get around the idiots, but....... It is very specifically states that the slicers are NOT NSF approved. NSF National Sanitation Foundation, these are the rules concerning human consumables and their supporting products. Potty water (drinking water) pipe for municipalities requires NSF, if its not NSF its not allowed. Everything has rules "Codes" legal requirements for one reason or another, CSA, UL, ASTM, AWWA, NSF, safety if nothing else. I am thinking maybe these might have been made somewhere were there is no accountability for the materials used?
<shrugs> I know that not being NSF doesn't make it a bad slicer, it just hasn't bothered to passed the tests? Just makes me wonder.
Another question, I am old school.... yeah right, go figure....LOL But what ever happened to using HP rating on electrical motors? If I can see one is 1/2 HP, and another is only 1/4 HP, I can understand some price difference. On similar slicers with different HP motors the High or large size motor would last much longer. So why don't manufacturing specs always show the HP rating anymore?
Seriously just wondering.
Last edited:
pepgarudiola
Newbie
- Apr 25, 2016
- 1
- 10
beefmeister
Smoke Blower
Great points. As regards the slicer, it is just stating that the design and/or cleaning guidelines do not conform to NSF standards as relates to commercial kitchens.
And the manufacturer and retailer have not submitted said appliance to NSF as it's being sold for home use. That's my take....
As to HP, isn't 1/3 HP or 1/2 HP a rating?? I think buying as much horsepower you can afford as well as gear driven as opposed to belt driven are important factors.
And the manufacturer and retailer have not submitted said appliance to NSF as it's being sold for home use. That's my take....
As to HP, isn't 1/3 HP or 1/2 HP a rating?? I think buying as much horsepower you can afford as well as gear driven as opposed to belt driven are important factors.
25acp
Newbie
- Jul 13, 2016
- 2
- 10
I just bought the Chefs Choice 10 inch from Amazon $299.00 with free shipping. This thing is big and heavy, but it's a serious meat slicer. I've sliced beef for jerky once and it cuts nice and uniform slices. I have looked for years for a used Hobart or Berkle slicer, and I find them from time to time of CL, but they run $650.00. If I was in the meat slicing business I wouldn't hesitate to buy a "new" Hobart, but this machine works fine for my needs. As for "my needs", I have been cutting jerky slices for years with a sharp knife, and it takes an hour to an hour and a half to cut up ten pounds of slices. This slicer does it in just a few minutes. The machine really needs to be taken apart for proper cleaning and that is a bit of a chore, but about fifteen minutes, and its done. I would still be using my knife, except my son just joined the Navy, he and his buddies can make ten pounds(two and a half lbs dried) disappear in no time! The reason I'm here, in fact, is to try and learn a way to "smoke" jerky efficiently and hopefully get a better smoke flavor and less leathery jerky than liquid smoke and my dehydrator is giving me. Thank you all, for all your educational post, I've learned a ton of things already!
Terry - In Jacksonville Fl.
Terry - In Jacksonville Fl.
Exactly---Don't know how I missed that one---It's usually on my list.
LOL---When I used to buy packs of Bacon, I used to cut the whole pack in half before I'd even open it.
Bear
I hate to admit this but I have learned something new about bacon too. You know those bacon irons, presses, bricks, heavy push it down thingies. I always thought that they were to make your bacon flat so it cooked uniformly. Just some other utensil to need cleaning but not really needed. Makes sense right?
Ding Ding Ding...... it also prevents shrinkage! A thin slice of bacon will normally shrink to 1/2 its size while cooking, drop a weight on it and it stays the same as you put it in. Its like getting twice the bacon!
AND yes I still fry my bacon.
I am so looking forward to bacon and andouille season this year. Like a kid awaiting sanity clause!
Ding Ding Ding...... it also prevents shrinkage! A thin slice of bacon will normally shrink to 1/2 its size while cooking, drop a weight on it and it stays the same as you put it in. Its like getting twice the bacon!
AND yes I still fry my bacon.
I am so looking forward to bacon and andouille season this year. Like a kid awaiting sanity clause!
chefbruz
Newbie
- Sep 7, 2017
- 15
- 10
I was thinking of buying a slicer too, but thinking of Alton Brown's dislike of single use tools I decided to give it a go with a really sharp large Victorinox Chef's Knife. It worked OK, especially since I wrapped the Bacon in Paper after smoking and let it sit in the fridge for a week.
The Victorinox is very thin, so it slices fairly well. I have used a specific knife like the one in the Amazon Ad to slice cured Ocean Trout (like sliced Smoked Salmon) and I borrowed a very very special Japanese knife to slice paper thin rare roast beef at a restaurant, but the Victorinox did the job on the bacon... just sayin'
I can understand that.
Just beware if you undertake like 15pounds+ of bacon or want to slice stuff like a whole smoked turkey breast or smoked ground loaves of meat (like my pastrami loaves). That's when the slicer saves the day :)
CMan - It has been a few years since you bought your Avantco, so how would you rate it now? I'm looking at buying one currently. Thanks!If you're thinking bigger, check out the Websturant Store here in PA if you can't find something locally. Mine came 3 days after purchase which is pretty darn quick.
Here's some good pics of the Avantco 10" :
unclejhim
Meat Mopper
I
I'm not CMan but I've had a 10" Avantco for several years and it's been great. I can slice slab bacon right out of the freezer.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
Hot Threads
-
Our Second piece of Heaven, Little piece on the Atlantic Ocean
- Started by DRKsmoking
- Replies: 57
- General Discussion
-
How Do I Get Rid of These Armadillos?!!
- Started by seenred
- Replies: 41
- Blowing Smoke Around the Smoker.
-
Non fat dried milk
- Started by hog warden
- Replies: 37
- Sausage
-
Featured A couple thick strips please!
-
Getting to the bottom of what happens to cure in smoked sausage
- Started by hog warden
- Replies: 31
- Food Safety
