Mods to my Oky Joe's Longhorn Smoker..thoughts welcome

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

flakeyone

Newbie
Original poster
Sep 22, 2012
1
10
I just acquired a Oklahoma Joe's Longhorn from Lowe's for $200. Got a deal due to a dent in the unit which I am repairing. I have been reading and decided since repairs are in progress I may as well get after some mods. I decided to upgrade exhaust flue to 4" from 3" and have installed it below the grate level. I am moving the 3" flue to the fire box side for relief purposes, perhaps heat or smoke needs some venting and thought this would be a benefit instead of having to open fire box. I still need a tuning plate (from what I read, this is worthwhile). I will also build a charcoal grate. I have plenty of work remaining to do on her before I start cooking and I welcome any thoughts anyone has on these particular units and modifications. Is the tuning plate as beneficial as I have read?
 
I had an offset a while back and I did mod it with a tuning plate to distribute the heat/smoke.  I think it helped but I still wasn't happy so moved on.  I didn't realize the OK Joe needed many mods.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky