or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Fridge/Freezer Builds › PID controllers for electric fidge smokehouse
New Posts  All Forums:Forum Nav:

PID controllers for electric fidge smokehouse

post #1 of 4
Thread Starter 

hi all..want to put it right out their quickly rather than searching around on here.

 

I want to use a standard two burner table top hot plate for my smokehouse....it will be about 1500 watts total on 110 power cord.

 

Can I use this PID to plug the hot plate in to tell it to turn on and off by interior temp?

 

http://www.auberins.com/index.php?main_page=product_info&cPath=14_28&products_id=72

 

The only reason I was going to go two burner unit...one for heat..the other for my smoke wood chips.

 

thanks for your info...

 

post #2 of 4

Yes you can. I use one for my Bradley. Plug the hotplate to the back of the PID and the pid to the socket. hang the pid temp probe where you like in the box.

post #3 of 4
Thread Starter 

thanks nepas...actually...reading some more...this unit is only good for 11 or 1200watts...I have to go with the universal one for up to higher wattage??.

 

http://www.auberins.com/index.php?main_page=product_info&cPath=14_28&products_id=110


Edited by BBQONICE - 4/15/12 at 4:47pm
post #4 of 4

I went with this one:

http://www.auberins.com/index.php?main_page=product_info&cPath=8&products_id=203

 

More money, but more versatile. Also, I have a tendancy to overbuild.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Fridge/Freezer Builds
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Fridge/Freezer Builds › PID controllers for electric fidge smokehouse