or Connect
New Posts  All Forums:Forum Nav:

New Smoker Build

post #1 of 10
Thread Starter 

Hey Guys. I was wanting to build a Triple barrel offset reverse flow smoker. I seen the triple barrel style on a different web site with three 55 gallon barrels with two on top and one in the center of the two upper barrels. I was wanting your thoughts and idea's of a offset reverse flow, Will it work or not? I am not sure if it will get hot enough to cook on.I stacked some barrels and took a picture of what I was thinking of.

2012-04-07_14-10-33_648.jpg

post #2 of 10

If you build it, they will come.

That's a great idea. I'm looking forward to see how it comes out.

Someone will be behind me shortly to help you, but in the mean time......

 

thumb1.gif

post #3 of 10

That should hold some meat...PDT_Armataz_01_34.gif

post #4 of 10

It will work but I would be concerned about fuel consumption since the metal is very thin with the drums. I look forward to seeing how it all turns out for you George.

post #5 of 10
Thread Starter 

2011-04-23_13-34-24_126.jpg

I have the base and bottom drum attached and wheels on it. I should have upper drums attached tomorrow.I will have pic's tomorrow. I am concerned about fuel also it will be a wood burner.These are pic's are of a double barrel reverse flow I built last year,Not to bad on fuel I use charcoal and wood in it.For some reason I can't get the words above the pictures.

2011-04-23_13-40-01_185.jpg

post #6 of 10
Thread Starter 

2012-04-09_19-49-32_745.jpg

Here is a update on my Triple Barrel UDS Reverse Flow Smoker Build, I put a base,wheels and attacted the barrel on it here is pic

post #7 of 10

thumb1.gif looking fwd to the test run!

post #8 of 10

Looks like it is coming along nicely

post #9 of 10

popcorn.gif

post #10 of 10

Gonna look nice when it's done.......biggrin.gif

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Other Builds