or Connect
New Posts  All Forums:Forum Nav:

Need help!!

post #1 of 4
Thread Starter 

I want to build a smoker, firebox is built and i want to do a bottom mounted firebox. is that design a good and efficient way? im building a 11 gauge smoke box to go above it at 22x22x36 and wanted to know if it will work ok before i buy the steel and make the first weld

 

post #2 of 4

Do you have more details of your plans for this build? FB size.....etc.

 

post #3 of 4
Thread Starter 

I was planing on a 24 deep 24 tall and 36 long. The top will be 12 inches and 45 degree down to the side for a door. I want to mount the firebox underneath but haven't decided if I want a flush mount or drop it down and run a stove pipe wrapped with insulation the fire box is 18 inch cube

post #4 of 4
Thread Starter 
And the fire box is 18 inch cube
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Smoker Builds