Stuffer tube deal

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
If you cant see them then dont buy them........ I would stay away from that seller... some one will be here shortly who has bought some tubes

Joe
 
Wicked1, morning....  If you have a box store close, and a tubing flaring tool, you can make your own.... They have thin wall tubing in various diameters... I made 3 stuffing tubes from their tubing..... 

Tools required.... flaring tool, torch for annealing the brass tube.... washer if necessary to keep the tube from from going thru the plastic tube....  this will work without the washer also.....     Tube cost $3.85...  1/2" / 13mm OD  .014 wall... x 12" length

http://www.ksmetals.com/RetailLocations.html

0e641657_tube1.jpg


I made 1 tube from type M 1/2" copper also... 5/8" OD.... it is on the left.....  that is available at Home depot

6fb6dc7d_tube5.jpg


Food for thought...   Dave

http://www.ksmetals.com/RetailLocations.html
 
How many LEM 5 lb tubes you need. Local BPS has 5 of em. Was there this morning.

838ebc45_lem5tu.jpg
 
How many LEM 5 lb tubes you need. Local BPS has 5 of em. Was there this morning.
You better snatch those up. I ordered one from LEM beginning of February with a ship date of 2/29 and another forum member ordered in January. Of course the 2/29 ship date changed on 2/28 with an expected ship date of April 15. This tube size is sold out on every website/store I have checked. 
 
 
You better snatch those up. I ordered one from LEM beginning of February with a ship date of 2/29 and another forum member ordered in January. Of course the 2/29 ship date changed on 2/28 with an expected ship date of April 15. This tube size is sold out on every website/store I have checked. 
 


Have had one for years now.
 
Wicked1, morning....  If you have a box store close, and a tubing flaring tool, you can make your own.... They have thin wall tubing in various diameters... I made 3 stuffing tubes from their tubing..... 

Tools required.... flaring tool, torch for annealing the brass tube.... washer if necessary to keep the tube from from going thru the plastic tube....  this will work without the washer also.....     Tube cost $3.85...  1/2" / 13mm OD  .014 wall... x 12" length

http://www.ksmetals.com/RetailLocations.html

0e641657_tube1.jpg


I made 1 tube from type M 1/2" copper also... 5/8" OD.... it is on the left.....  that is available at Home depot

6fb6dc7d_tube5.jpg


Food for thought...   Dave

http://www.ksmetals.com/RetailLocations.html


yeahthat.gif
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky