Ultimate Breakfast Fattie w/Q-View

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

prebeck32

Newbie
Original poster
Aug 25, 2010
5
12
For this fattie, I decided to treat some members in my church's small group to a special treat! Meeting for brunch, this was my breakfast contribution. I started out with scrambled eggs, 2 diced jalapenos, 1/4 onion and a bag of sharp cheddar (seen below).

bdf843ec_DSC_0730.jpg


Next, I added in some tater tots right out of the oven!

7a1c3e1d_DSC_0731.jpg


While mixing and letting simmer, I flattened my "hot" sausage into a freezer bag.

c14da132_DSC_0732.jpg


After the sausage was prepped, next came the bacon weave.

0931019a_DSC_0735.jpg


After the bacon was completed, I used my own, newly-made fattie piston (all the credit goes to cowgirl) and packed in the eggs, tater tots, onions, jalapenos and cheese into a 2" PVC pipe.

7f58d21d_DSC_0750.jpg


Another shot of it compressing the fattie guts!

1bb2c792_DSC_0751.jpg


After being compressed, I let everything cool into the refrigerator for a couple of hours before final assembly. First, I positioned the flattened sausage onto the bacon weave.

e78b241c_DSC_0736.jpg


Next, I pushed out the fattie piston onto the sausage...I was amazed at how everything stayed together and remained compact!

cf5ca680_DSC_0737.jpg


Another angle with more tater tots!

fbaa565b_DSC_0739.jpg


Next step was to wrap, seal and cool overnight.

61549c68_DSC_0740.jpg


I smoked the fattie for approximately 4 hours anywhere from 250-280 degrees using apple wood. This was the final product after pulling it off the smoker. We like our bacon crisp and well-done!

506902b3_DSC_0745.jpg


Delicious and moist inside! Everything went together perfectly! Thanks for looking!             
drool.gif


f4962df7_DSC_0746.jpg
 
  • Like
Reactions: liquidsteel
that a great looking FATTIE !!!!!!!!

I made one of them fattie piston 6 months ago .

still need to try it out . every time I make a fattie

i just throw it all together and roll it up.

i need to try it out and see how good it works.
 
It all looks great - Glad it came out well for you
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky