or Connect
New Posts  All Forums:Forum Nav:

univex boston slicer

post #1 of 12
Thread Starter 
Anyone own or have opinions on this brand? I I'm going to check one out I found on Craigslist. The guy isn't sure of the model it it is a univex boston. There's a 6509 and a 7510 I believe. Only thing I noticed is that it isn't open behind the blade. Meaning there's a piece of frame extending down to the base and anything sliced almost looks like it has to do a 180 once its through the blade. He's looking for $200 obo and I'd really like one for doing jerky and lunch meats. The only thing I'm concerned about is how the meat is deflected after its cut. Anyone else have a Slicer like this? Thanks.
post #2 of 12

Got a pic?

 

Some of these slicers are a pain to clean and take longer to clean, than slice your meat!

The area behind the blade gets pretty nasty, so you have to take the blade off and clean it very well.

 

For $200 it sound like it's a pretty good deal!

 

 

Todd

No Creosote! A-Maze-N Smokers

Reply
post #3 of 12
Thread Starter 
I'll try to get a pic up. My pc hard drive is fried and I'm trying to do everything on my phone. At least my priorities are straight, Slicer before hard drive. Lol.
post #4 of 12
Thread Starter 
I'll try to get a pic up. My pc hard drive is fried and I'm trying to do everything on my phone. At least my priorities are straight, Slicer before hard drive. Lol.
post #5 of 12

Sure wish you had a photo. Is it a 12"? Does it have sharpening stones with it? You have to be careful with used slicers. Especially the big ones. If the blade is worn down or nicked or bent and has to be replaced, they are very expensive.

post #6 of 12
Thread Starter 
Http://reading.craigslist.org/app/2749475440.html

At any rate Photobucket isn't uploading the pics so that is a link to the Craigslist listing. Any opinions? The sharpening stones come with it.
post #7 of 12

I looked around on google..

 

Nice machine...parts and manuals are available.

 

Looks like a good buy to me.

 

  Craig

post #8 of 12

It looks like the 7510...

 

 

The meat falls off the back..just like any other slicer and the blade cover on the back comes right off for cleaning.

 

http://www.univexcorp.com/equipment/duro-7510.php

 

  Craig

post #9 of 12

370v motor???

post #10 of 12
Thread Starter 
I'm thinking he meant 370w motor.
post #11 of 12

Take a look at the url I posted...

 

 

Std. Voltage: 115 / 60 / 1 Motor: 1/3 HP. AMP Draw: 3.9

 

  Craig

post #12 of 12
Thread Starter 
Thanks for the replies everyone. I never got a call back and he didn't answer when I called. Must of sold it to someone else. Third deal I missed not being able to do anything till the weekends because of my schedule. Thanks again everyone.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Smoking Gadgets and Tools.