or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Electric Smokers › Auto tuning the Auber Dual PID
New Posts  All Forums:Forum Nav:

Auto tuning the Auber Dual PID

post #1 of 5
Thread Starter 

I just installed my Auber PID (dual probe plug and play) in the smoker I built and I have a couple newbie questions.  The manual isn't toally clear.  I have probe one mounted in the wall and ready to go  Do I need to have probe 2 in some meat to do the auto tune or can it just be hanging in the air?

 

Any other tips?

 

Awesome forum by the way!

post #2 of 5

Got any pics of your build?

post #3 of 5
Thread Starter 
Quote:
Originally Posted by SmokinAl View Post

Got any pics of your build?


http://www.smokingmeatforums.com/t/111635/commercial-oven-to-electric-smoker-build
post #4 of 5

All you need is the smoker probe plugged in. Start auto tune and wait for it to cycle through the process. I would go into the manual setup and record the P, I and D values so you can compare and revert back to if necessary.

 

Joe

post #5 of 5
Thread Starter 
Thanks Joe!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Electric Smokers
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Electric Smokers › Auto tuning the Auber Dual PID