Outdoor storage that fits WSM 22"?

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
Good idea getting your 22" a mate to keep it company on those cold nights.
 
Plus it gives him somewhere to go when the wife kicks him to the couch! LOL

Man, that is a great looking shack you got there TY! I am three shades of envious... lol.
 
Here is what i built for my WSM's  works like a charm..

3b2ac3ff_P8300022.jpg


96077bcf_P8300021.jpg


48943a9e_P8300020.jpg
 
Where did you find your pull hasps?  At my Lowe's (didn't look anywhere else yet) they don't have anything bigger than 2.5" which I wouldn't use.
I had to go to an old fashioned hardware store to find them.  That's the one item you'll have to search for.  That's why I included the manufacturer and part number.  I didn't have any luck at the big box stores for large enough hasps.
 
I had to go to an old fashioned hardware store to find them.  That's the one item you'll have to search for.  That's why I included the manufacturer and part number.  I didn't have any luck at the big box stores for large enough hasps.
Already ordered online (BIC Warehouse thru Yahoo shopping)!!! 
biggrin.gif
  Thanks for the details on it!!
 
I use stainless nuts, bolts, washers, etc (but this is a personal choice, not mandatory).  I avoid putting anything in the interior that has been galvinized.  Galvinized is the bad guy.  Take a look at the nuts and bolts that Weber used to assembly your smoker and grills.  Those are safe, obviously.
Dave - one more...  Are zinc-plated parts OK for cooker interior use?  I know galvanized means zinc-coated, but they're not quite one-and-the-same.
 
Here's a direct quote from WIKIPEDIA

Galvanization (or galvanisation) is the process of applying a protective zinc coating to metal, in order to prevent rusting and galvanic corrosion. The term is derived from the name of Italian scientist Luigi Galvani.

Although galvanization can be done with electrochemical and electrodeposition processes, the most common method in current use is hot-dip galvanization, in which steel parts are submerged in a bath of molten zinc.

Now you know why I prefer stainless.  For a few pennies more, I don't have to wonder.
 
Yep, absolutely!  I was able to find some parts I wanted but zinc-plated, so I'll hold off until I can find the SS.

Thanks again for your input!  It was invaluable.  I'll follow up and post my mods when I'm finished.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky