First smoke with my

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

roller

Smoking Guru
Original poster
SMF Premier Member
Mar 10, 2010
6,040
57
N.E. Louisiana
new A-MAZE-N-PELLET SMOKER.  I am smoking 2 Pork Loins today using my new pellet smoker that I bought from Todd this week. I know now why he named it what he did I am 4 hrs. into the smoke and have used only 3/4 of the first row of pellets. The smoke is just right not to much and not to little. I did supply some air into the bottom inside of the smoker with a small pump because my Electric smoker has NO air vent holes in the bottom. It is working great. I am using the mixed blend pellets and the loins are getting a real nice color to them..I will post Q-View later. I will not be able to post a Money shot because both of these are going to the church.
 
cant wait
popcorn.gif
 
Can you also post a pic of the air pump and how it's fed thru the intake?

Todd
 
Sounds good I'll be looking forward to the Qview as well 
popcorn.gif
 
2ee4bc1f_0826011757.jpg
I ended up with a 6 1/2 hr. smoke on these guys and you can see how much of the pellet load that I used and where I stopped it when the smoke was done. I smoked the Loins at 235* I had to take them to the church for a ladies dinner so I did not get to taste them but was told that they were really good and very moist... As stated before I added a little mod to my smoker to add air flow so the unit could get enough air for proper burn. I just drilled a small hole in the bottom side of the smoker and attached a small air pump and ran the air hose thru the hole that I had drilled. It worked perfect and I had no trouble with the burn. My little smoker has NO air vents anywhere in the bottom since it is electric and only  1 about the size of a quarter at the top. Here are some pic of the way that I installed it...Thanks for looking....and thanks Todd it is going to make my life much easier not having to add wood chips every 30 min while smoking...
a6f04eb6_0826011114.jpg
083d6301_0826012335.jpg
3d30186e_downsized_0827010823.jpg
312d13ff_0827010820.jpg
481addf1_0827010821.jpg
 
Last edited:
One day I will figure out how to get these pictures in order...It just does its own thing with me...Sorry for that.
 
Nice little mod there, Bill.

I will have to refer to this, with all the guys who have mentioned they don't have any air flow in their smokers.

Not sure, but I think MES Analog smokers have that problem.

Bear
 
Yes Bear mine is sealed up tighter than a drum so I had to get some air in there some how and it worked just fine...
 
And the winner is.......Roller!

Thanks for the very simple mod!

This will allow my little gadget to work in any smoker, with or without vents.

Very Cool!

And the "Church Ladies" Thank You Too!!

Todd
 
Thanks Todd glad you like it...Been smoking a Brisket all day and the smoke just keeps rolling. Have not added any pellets yet...
 
Last edited:
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky