or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Charcoal Smokers › First Mods (of many to come) on a char-broil off set
New Posts  All Forums:Forum Nav:

First Mods (of many to come) on a char-broil off set

post #1 of 18
Thread Starter 

My first mods for this baby.  I plan more but have to order parts.  This is my stack extention:

IMG00060-20110727-1804[1].jpg

 

Here I sealed every part of my firebox.  I also have tried to make my own gaskets on the end door put I am waiting for it to cure.  Dont know if it will work but I can always scrap it off and try RTV gaskket maker or something. 

IMG00061-20110727-1804[1].jpg

 

post #2 of 18

Looks good!

post #3 of 18

I have that same smoker. Why the exhaust baffle extension? I haven't used

mine yet so I'm going to follow along. I want my Char-Broil to be top notch.

 

Please keep posting mods and tell why...thanks...James

post #4 of 18

looks good, keep us posted

post #5 of 18

popcorn.gif

post #6 of 18

What did you use to seal up the firebox?

The reason for the stack extension down to the grate level is so the smoke has to come down to the grate level before it exits. Gives the meat more exposure to smoke. Without the extension the smoke just goes up an out without going over the meat first.

post #7 of 18
Thread Starter 



 

Quote:
Originally Posted by alelover View Post

What did you use to seal up the firebox?

The reason for the stack extension down to the grate level is so the smoke has to come down to the grate level before it exits. Gives the meat more exposure to smoke. Without the extension the smoke just goes up an out without going over the meat first.


 3f49b762-c8cf-481c-94c9-aaecbd7d4ec0_300.jpg

Home Depot 5.97 but I found out that its water soluble.  So if it ever rains here in Vegas, I will have to try something else. 
 

 

post #8 of 18
Thread Starter 

 

Quote:
Originally Posted by MasterOfMyMeat View Post

 

Please keep posting mods and tell why...thanks...James



Next Mod.  Charcoal basket.

 

IMG00066-20110729-2038[1].jpg

 

Here is what it looked like.  I just had it sit on the bowed rack that it came with so there was about 4" of clearance.  Besides a couple cut fingers, it was really easy to make and besides the 24 x 24 expanded metal, I used (2) nuts, washers and bolts to insure that it wouldn't come apart. 

IMG00068-20110730-0917[1].jpg

post #9 of 18

I was in Home Depot the other day looking at the sealant you used. I

was concerned about the water soluble issue as it rains daily here in

SW Florida. Couldn't find anything else that might take the heat though.

 

I like the coal basket, although I don't have any metal bending tools, I

think I can still get it done. My only thought going forward is that I want

to get the a-maze-n and don't know where to put it.

 

Would it go under the basket?

 

Thanks for the update Vegas, I'm taking notes and getting my list ready...James

post #10 of 18
Thread Starter 

I thought about the rain too.  I think if it fails, i will try the automotive RTV sealant.  That's my plan B. 

 

As for the bending tools.  God gave them to you.  I used a sawz-all and my hands.  I would wear gloves next time.  LOL.  Ill give you the dimensions if your going after it......

post #11 of 18
Quote:
Originally Posted by vegassmokeout View Post

I thought about the rain too.  I think if it fails, i will try the automotive RTV sealant.  That's my plan B. 

 

As for the bending tools.  God gave them to you.  I used a sawz-all and my hands.  I would wear gloves next time.  LOL.  Ill give you the dimensions if your going after it......



Please, I am going to make one for mine and if you have them handy, thanks...James

post #12 of 18
Thread Starter 
Quote:
Originally Posted by MasterOfMyMeat View Post





Please, I am going to make one for mine and if you have them handy, thanks...James



I sent you a PM.  Let me know.

 

post #13 of 18
If you wouldn't mind, I would like the dimensions as well. I just bought the same smoker today.
post #14 of 18

it also is not food grade

post #15 of 18

I kind of like tasting my food without extra whatever

 

post #16 of 18

on the factory grate in the fire box, get to chunks of rod about 2 inches longer than the grate and hose clamp them to the outer edges leaving an inch xtra on each side. it will raise the grate up a some to allow better airflow and more area for the ash to rest.

post #17 of 18

do not use any galvanized pipe it contains zinc and is carcinigin when burned

post #18 of 18

MrMiyagi,

 

It is kind of hard to understand just what your comments are addressing at times. As to the galvanized pipe. I know that if it is heated to a given temperature it will produce a toxin. But using it as an exhaust pipe on a smoker. I have to wonder if it will reach that temperature. but I regress and have to ask if anyone would want to chance this. Even though the toxic gases would most likely be drawn out away from the meat. It would still be a possible hazard to those around your smoker.

 

Question: is exhaust pipe for cars galvanized or something else? Got mine at Meineke auto shop.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Charcoal Smokers
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Charcoal Smokers › First Mods (of many to come) on a char-broil off set