Just bought a Char Griller Super Pro w/ side fire box

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

kgnickl

Newbie
Original poster
Jul 2, 2011
1
10
Picked it up over Father's day weekend when on sale for $99 at Lowe's. I also bought a cover and the side firebox. I have to say the new style covers CharGriller is selling this year are 100x better than the old style I bought a couple years ago with my CharGriller Duo. Also, sold my CharGriller Duo a few days later because it just took up too much space if you factored in a firebox being attached, also I rarely used the gas side of the grill.

Just finished up seasoning the grill and adding a few mods. Now just need to get a free weekend to give slow smoking some ribs a try on my new toy.

A few things I've done include:
  • Dryer Vent.
  • Big wheels for easy pushing through grass.
  • Removed original gauge (was off 30-40 degrees and filled with oil and moisture....) and patched the hole.
  • Added (2) new River Country 2" gauges to the lower left and right.
  • Added a coupe hinges to keep the sliding side firebox tray securely closed (kept popping out a 1/4 inch or so on one side when closed....).
  • Rubbed a few coats of Waterlox on all wood parts to keep them looking good and make them easy to clean. Good stuff and had a bunch left over from a previous project.
  • Took the extra plate between the grill and firebox and cut all but 2 tabs off and then used wing nuts to secure inside the grill. This allows me to use the either side as a grill when I'm not smoking. I figure if I'm cooking for 1-2 then use the small firebox or if 2+ then use the grill side. Then when smoking I just remove it.
  • Charcoal basket for the firebox.
9c931ac8_1.jpg


4ba7bed9_2.jpg
3c00f8e6_3.jpg
a77a5f15_4.jpg
dfdf3036_7.jpg
c893bf6f_6.jpg
a23ec59a_5.jpg
 
Nice rig!  I have the outlaw and just put on the sfb.  I plan on doing most of your mods too.  Later Ron
 
Nice mods! Let us know how the temps do with the damper in the middle like that.

Now on with the Qview!
sausage.gif
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky