First time Pork Shoulder w/qview

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

talan64

Meat Mopper
Original poster
May 5, 2011
277
18
Vancouver, Wa
So, I'd been wanting to smoke some pork for pulling, and read up on the suggestions (and the hell) for butts.  Decided I better start it early to make sure it was ready for dinner.  I had a brisket go 14 hrs, so I knew I would be into it for at the very least that long.  Picked up the nice 2 pack of boneless from CostCo ($1.89 /lb).  These were very pretty, no bones and trimmed pretty good.

0f6acc0c_shoulder06112011_0523_1.jpg


I used coated one with mustard before adding a KC BBQ dry rub.

f6470fdf_shoulder06112011_0524_2.jpg


The Dry rub recipe is one that I found on (of all places) About.com

39513e01_shoulder06112011_0525_3.jpg


Here are the 2 of them all wrapped and ready to sit for a while in the fridge.

34fbc3c5_shoulder06112011_0531_6.jpg


Skip ahead time.  Here they are after the first 8hrs of smoking.  Started them out @ midnight Friday night on 180 deg.  The open area to the front left of the smoker is for the bean crock.  Needed to pull it out to add some seasoning to it.

8b96c167_shoulder06112011_0534_7.jpg


At 168 deg, (16 hrs) I put them into a foil pan with about 16 oz of liquid (1/2 & 1/2 water / apple juice).  2 1/2 hrs later they were at a real nice 200 deg.

After 18 1/2 hrs in the smoker and 1/2 hr resting they were ready to pull.  You can see the one on the right has a little bark missing....I couldn't help myself!!

c88de570_shoulder06112011_0535_8.jpg


I had to pull the mustard coated one first to try it out. (I didn't really notice much difference).  They both pulled nice and easy.

3323f5f6_shoulder06112011_0537_9.jpg


And here's the money shot!!  The beans and ABT's were off the smoker. BBQ sauce was from a recipe on found on SMF.  Thanks to Mrs. Talan for the corn bread and drunken apples (recipe from Famous Dave's).

750ac199_shoulder06112011_0541_11.jpg


Thanks for looking.  Enjoy all!
 
Last edited:
It all looks great! 

I'm a little concerned about your cook temp of 180* to start.  When did you raise that temp?  You don't want your meat lingering in the danger zone (<140*) longer than 4 hours to prevent harmful bacterial growth.
 
Looks good!

Like James, I wonder about the 180˚ start. I guess if you don't probe it for a few hours, but it's still a little low to start.

Bear
 
It all looks great! 

I'm a little concerned about your cook temp of 180* to start.  When did you raise that temp?  You don't want your meat lingering in the danger zone (<140*) longer than 4 hours to prevent harmful bacterial growth.


The reality is, that when set to 180, my Traeger is actually sitting at more like 190 - 200 deg (Very seldom does it get under 190 with that setting).  I didn't set a probe until 6 1/2 hrs into the smoke, and by that time I was in the stall at 153 deg.  I was gaining about 1 deg per 1/2 hr for the next several hrs.

Will have to start using the next higher setting though, since you all seem a little concerned.  when set to 225, it seems to hold real close, with less fluctuations.

Thanks for the warnings.
 
Last edited:
The reality is, that when set to 180, my Traeger is actually sitting at more like 190 - 200 deg (Very seldom does it get under 190 with that setting).  I didn't set a probe until 6 1/2 hrs into the smoke, and by that time I was in the stall at 153 deg.  I was gaining about 1 deg per 1/2 hr for the next several hrs.

Will have to start using the next higher setting though, since you all seem a little concerned.  when set to 225, it seems to hold real close, with less fluctuations.

Thanks for the warnings.
Sounds good Talan,

A lot less worries now that we know you didn't probe early.

No problem!

Smoke on, and thanks for the Great Qview!

Bear
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky