My first Build, RF Trailer.

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

barebonez

Newbie
Original poster
May 12, 2011
3
10
Yeah this is a big project to take on for someone who:

1. Had never built a RF Smoker.

2. Has extremely Limited welding skills.

3. Pulling everyhting from a pile of junk material ( actually I think that part is kinda cool myself)

I appologize that some of these pictures are dark and or Blurry, I was taking pics with my phone. Please Feel Free to Critique it, I can always learn from constructive critisism.

This is the Tank, my starting point.

 
416bcb6d_Smoker1.jpg


I got the door cut and burned the tank out real good.

81e9f43a_Smoker3.jpg


Mounted on the trailer.

2149a366_Smoker4.jpg


Built the firebox from an old hot water heater.

 
2c842ee0_Smoker6.jpg


 

Cooking grate frames.

170a3730_Smoker8.jpg


Cooking for a friends welcome home from Iraq Party.

44d66a45_Smoker13.jpg


From Left to right, Deer (hams and shoulders) Chicken, Bologna, and 4 Pork Shoulders (foiled)

8801f68e_Smoker17.jpg


Negative Tongue weight was a problem So I added some length. Decided that I would add

a Vertical Propane Smoker for a quick warming box.

72ab5747_Smoker18.jpg


This is It pretty Much complete, Of course I will find something else to change soon I am sure.

5a5e8cc9_IMG_20110507_193518.jpg
 
The are, But the galvanized coating was first ground off and then burned to about 600 degrees, From all that I have read it is safe to use if the galvanized coatings are removed.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky