or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Side Fire Box › Chargriller SFB ashpan gaps
New Posts  All Forums:Forum Nav:

Chargriller SFB ashpan gaps

post #1 of 4
Thread Starter 

I have been searching the forums looking for anything relating to this problem but can't seem to find anything.  My SFB ashpan doesn't completely seal when I go to shut it.  Just wondering if anybody else has had these problems and any solutions would be appreciated.  The lid won't completely close either.  If anything I guess I will just get a bigger hammer and solve the problem old school.

 

Thanks for any help

post #2 of 4

My ash pan fits snugly.  You must have a bad one.  My lid fits pretty well, but I lay a brick on the handle just because I am too cheap to waste any extra fuel.

 

Good luck and good smoking!

post #3 of 4

I had a gap on mine to, i just hand bent it a little and it fit much better. I guess if you can't bend it back some you could use some hi-temp silicone around the edge to help seal it up.Or thin stove gasket.

post #4 of 4

Good luck with the smoker.


 

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Side Fire Box
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Side Fire Box › Chargriller SFB ashpan gaps