New Posts  All Forums:Forum Nav:

30 gallon UDS

post #1 of 7
Thread Starter 

I have  my plenty big BEVO baker now and have gotten hooked on building. I have a few smaller reverse flows in the works for friends that have had Q from mine. I love my stick burner and always will but I'm ready to try something new. I could use a smaller unit for single briskets or butts. Something fairly easy to control and can run for a long time unattended. That way dinner can cook while I build RF's. I'm gettting a drum soon from afriend and will attempt my first UDS build. Has anyone made a UDS from a 30 gallon barrel and if so, did it make a difference in the way it operated? Thanks for any input as I really would like to "branch out" and add new toys to my collection.  grilling_smilie.gif

post #2 of 7

I made one for a buddy and he's so happy with it he turned down a 55 gallon one .

 18 1/2 in grills fit it and the lid for it is from his ECB ,i left enough of a lip in the top for it to sit on and

hes uses the water pan fro it too  The lid he's using now is from a damaged 18 1/2 wsm bottomparty and issac b-day 007.JPG

post #3 of 7

I made one for a buddy and he's so happy with it he turned down a 55 gallon one .

 18 1/2 in grills fit it and the lid for it is from his ECB ,i left enough of a lip in the top for it to sit on and

hes uses the water pan fro it too  The lid he's using now is from a damaged 18 1/2 wsm bottomparty and issac b-day 007.JPG

post #4 of 7
Thread Starter 

That's the size I'm looking at. Nice looking setup. thanks for the pics.

 

I'd be curious to see some more pics of the workings if ya can. thnks


Edited by fourashleys - 4/7/11 at 8:29pm
post #5 of 7

Dave, did you do anything different with the vents on the smaller size drum?

 

I have one of these sitting out back, I just haven't messed with it yet. 

post #6 of 7

ZCI

this ring is from a ecb ,I cut it down to fit the top of the drum to hold the Lid from the ecb   ( click on the pic for bigger pics)

ZC

the ring sits on a half inch lip left in the drum top 

ZC

with the grill

ZC

vent is just a 3 inch hole with a flap to adjust air flow

ZC

the lid from the ecb with a 3 inch hole.....always open

ZC

handles from the ecb

 

Gus (my Buddy) has had this for almost a year now and swears by it .

 It works as good as my WSM  and will 14 hours and still have charcoal left.

The only thing he's changed is he added the Bottom of  my old WSM for a bigger lid

 If you use parts from a ecb you can still build one for less than 70 bucks

   We had a  couple ecbs from years gone by and used the parts from one of his

post #7 of 7
Thread Starter 
Very nice. Thanks for the info. Now to just find the drum.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: UDS Builds