brinkmann offset smoker with oklahoma joe features and very heavy steel and angle iron

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

smoker1service

Newbie
Original poster
Sep 6, 2010
12
10
balch springs texas
I have a smoker that I have almost made into a oklahoma joe , Custom 3/16 inner and outer rolled steel welded in (replaced rotted out meat ) Ihave replace the very thin inner metal between the firebox and smoker drum , 1/4 plate steel , gonna add a deflector shield from the firebox to the smoker drum for better heat control and no hot spots . weled the firebox to the drum ,welded the leggs to the drum , all new angle inside the drum and round bar 1/2 thick for holding a ton of weight and food , made the heating tray on the firebox ( hand made ) , I am needing to finish the shelving for the drum and lower wood storage . This is a one off smoker and I am proud of the changes that I have made to it and there is a price for quality (just go look at oshmans ) thin mwtal and no long life , This unit will and should be a life time smoker , I am thinking of adding a propane log lighter to this unit and can do it but it will bring the price up do to the labor and parts  . thanks for looking and god bless

carl brooks
 
Last edited:
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky