First off I don't know that you need the pipe with holes in it. But I also don't see that it will hurt anything, probably does need to be under the coal pan instead of above.question for all the UDS fans......?? Would this idea work?
What smoker would you buy if you had $500
- Thread starter symansaysbbq
- Start date
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
arnie
Smoking Fanatic
Without a doubt I’d buy a Cookshack Smokette.
I have had one for 8 years and just recently upgraded to an AmeriQue.
They are as near to set it and forget it as you can get.
They are American made and their customer service is second to none.
You can actually talk to a real person who knows what he is talking about.
I have had one for 8 years and just recently upgraded to an AmeriQue.
They are as near to set it and forget it as you can get.
They are American made and their customer service is second to none.
You can actually talk to a real person who knows what he is talking about.
This is the part my wife likes. I would like a smoker that just works as well. I think I am going to go with the 22" WMS. My last DYI did ok until the mice got to it and turned it into there home
Take a look...Regulating the heat was not easy.
How would you recommend insulating a 22" WSM?
Thanks everyone....
cycletrash
Meat Mopper
I think I a going to build one. I found this old commercial over that I am hoping I can get for a good cost (free). I also found a nice metal tank that I think would be good for a fire box. The only think that will be hard to find is someone that can help me weld. I don't have a welder and don't know how. Take a look at my idea, please share your thought.
sorry for the small type.
sorry for the small type.
Myself, I am not a fan of having two separate locations for the heat to enter. I would rather go for one larger pipe entering the cook area below a diffuser plate with the smoke to rise up to one stack located in the center. Since you are going to have a stoker on it the natural draft is not as big of an issue. IMO, that is.
Another thought may be to put the firebox below the cook box.
1. It would be a much easier build as far as making the connection between the two.
2. When its cold out you could drape a moving or welding blanket over the top box and hang down to help hold some of the radiant heat.
The connection to the cook box could be done pretty easy by cutting tabs like HVAC duct work has, where you cut the hole, insert the piece and reach inside and bend the tabs over. High temp silicon around it and you are set.
Now the lower connection is not as easy. I'm thinking but it hasn't come to me yet.
Another thought may be to put the firebox below the cook box.
1. It would be a much easier build as far as making the connection between the two.
2. When its cold out you could drape a moving or welding blanket over the top box and hang down to help hold some of the radiant heat.
The connection to the cook box could be done pretty easy by cutting tabs like HVAC duct work has, where you cut the hole, insert the piece and reach inside and bend the tabs over. High temp silicon around it and you are set.
Now the lower connection is not as easy. I'm thinking but it hasn't come to me yet.
I think I a going to build one. I found this old commercial over that I am hoping I can get for a good cost (free). I also found a nice metal tank that I think would be good for a fire box. The only think that will be hard to find is someone that can help me weld. I don't have a welder and don't know how. Take a look at my idea, please share your thought.
sorry for the small type.
Personally I think your Cabinet smoker was fine, Just replace those 10,000 btu burners with a 30,000 btu and you should be good as gold. my 2 cents
coacher72
Smoking Fanatic
This is the part my wife likes. I would like a smoker that just works as well. I think I am going to go with the 22" WMS. My last DYI did ok until the mice got to it and turned it into there home
Take a look...Regulating the heat was not easy.
How would you recommend insulating a 22" WSM?
Thanks everyone....
There are several ways you could insulate a WSM:
- They sell an insulated cover for about $100, think Cajun Bandit or somebody sells it.
- Use the foil wrap that you can put on hot water heaters. Just cut out an opening for the door access. Costs about $30-$40.
- Build a small "shed", just big enough to fit your WSM into and give it a little clearance. Vents on the bottom of the shed for air intake, vent out the top for exhaust, line the inside with foil backed insulation sheets. One side would be hinged or removable, and I would make the top removable as well. Cost: ???
In my opinion there should be no way they can get in from the original filing cabinet.
Apparently whatever you done to convert it to a smoker made enough room for the critters to get in.
I would look at all the possible places they could get in and use a steel mesh and cover those areas.
Hell I had rats in my weber grill one year
coyote-1
Smoking Fanatic
- Sep 14, 2008
- 554
- 15
I'm satisfied with the CGSP and Weber 22" kettle. With the addition of my various CGSP mods and the kettle rotisserie ring, the combined price of both is just around $500 now.
Very versatile arrangement. I'm gonna add a few tabs and handles to the ring. That will make it able to support a second stainless cooking grate.
Very versatile arrangement. I'm gonna add a few tabs and handles to the ring. That will make it able to support a second stainless cooking grate.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
Hot Threads
-
Questions for RecTeq owners
- Started by schlotz
- Replies: 66
- Blowing Smoke Around the Smoker.
-
Spammer PMs, Anybody Else?
- Started by chilerelleno
- Replies: 65
- Blowing Smoke Around the Smoker.
-
Lost my dad yesterday
- Started by normanaj
- Replies: 40
- Blowing Smoke Around the Smoker.
-
On the Edge of Trying Sausage Making
- Started by BrianGSDTexoma
- Replies: 35
- Sausage
-
Took a stroll this afternoon
- Started by Buckeyedude
- Replies: 33
- Field and Stream
