Thermal Protection

Discussion in 'Smoker Builds' started by victor, Jan 12, 2014.

  1. victor

    victor Fire Starter

    I want to modify an MES 40 to control the burner with an Auber WSD-1503CPH.

    And, I want to utilize thermal protection, preferrably resettable. Or, is it recommended to use non-resettable? What, if any thermal protection is the most desireable?

    Additionally, since the MES 40 tops out at 275º; should I use a 300º device shutoff rating?
     
  2. daveomak

    daveomak Smoking Guru OTBS Member SMF Premier Member

    bypass the electronics and control the element only..... I wouldn't operate it above the 275 limit.... that is a factory design....
     

Share This Page