Sub Zero Deer Sticks

Discussion in 'Sausage' started by tjmitche, Jan 14, 2016.

  1. tjmitche

    tjmitche Smoke Blower

    I took my first stab at making deer sticks this weekend. It was a good learning experience and I'm sure I'll continue to improve over time.  I'll apologize in advance that the Q-views aren't as good as they could be.  I had a housefull and the final shots were taken at 2:15AM when the temps finally got to where they needed to be.

    Because this was my first time around with stick making I wanted to keep it pretty simple. To that end, I went out and bought some LEM collagen casing (17mm) and some High Mtn sweet and spicy snack stick seasoning. For meat, I already have a bunch of ground venison packaged and frozen. It is mixed with 15% fatty beef.  Based on some good advice received here, I added another 15% ground pork.  Total weight of this batch was 14 lbs of meat.


    I mixed in the High Mtn mix and we proceeded to stuff our casings.  This is where my first question comes.  What is everyone's success with these collagen casings.  We had a fair number of blowouts.  It almost seemed that if you lost focus for just a second while stuffing with the LEM you'd over stuff and have a blowout.  Is this the norm for collagen casings?  Is it LEMs version of the casings?  I have had no blowouts when doing brats with hog casings.  Granted these are far smaller but they seemed really fragile.  Texture when eating has been good, but do you all prefer sheep casings over collagen for stability?  I've not used sheep yet and am not sure how it would effect texture when eating.

    We ended up with probably more finished product than I anticipated and the smoker was really full.

    This is a sampling of what went into the smoker. This is just prior to loading her up.


    A full smoker is indeed a happy smoker!  Two rows deep, there wasn't much room for anything more.

    My water bath was kept full til the very end (other than the first hr or so).


    Due to a lot of first timer mistakes and delays these didn't get into the smoker until late afternoon Sunday.  It was minus 5 degrees outside but my heavily modified MF didn't seem to care. There's lots of mass in it and its lined with insulation.  I let it ride at about 140 for about 2 hrs then bumped it up to 150 for an hour then up to 160 for another hour.  At that point I moved to 170 and let it role.

    The entire cook I had my AMPS tube smoker providing peach tree smoke. I really like Myron Mixon's pellets in peach.  They make a very nice mild smoke flavor.

    About 10 P.M. the inevitable stall occurred and the IT temp of the sticks stalled right at about 125-135 depending on where in the smoker I was monitoring.

    In spite of the ridiculously cold external temp, -10 by late in the evening, the Maverick ET-733 performed wonderfully just sitting on the side tray of the smoker. I wasn't sure how it would handle the cold but it never blinked. It was really nice being able to watch the Q temp and the IT temps on the remote device without stepping outside every 1/2 hr to look.

    At around 2: 15AM I pulled them from the smoker. I wish I'd have taken a smoker pic at this point but it was COLD and I was moving fast.  I dumped them right into an ice bath and let them cool down quickly.


    A quick sample was not disappointing.


    Texture and flavor were pretty darn good but not perfect.

    They're more mild than I prefer.  For half of this batch we added red pepper flakes just to spice it up a bit. I'm letting them age a little in the refigerator right now so have not tasted one of those yet. They will all be going into the sealer tonight for distribution and freezing.

    I also got to try out my brand new Food Saver.  So far I really like it.


    So a couple lessons learned from this time around:

    1) Don't skimp on seasoning.  High Mtn is good stuff no doubt, but it pales compared to what you can mix up yourself. It woulda been worth the effort to get exactly what we wanted.

    2) Re-evaluate the collagen casings... I would appreciate feedback on alternatives here. Or comments on if what we experienced was normal.

    3) Get started much earlier and bake in more time for a stall. Didn't really see that coming, but the stall in this cook was comparable to cooking a butt.

    4)  I can smoke year round.  If we could pull it off in these temps we can do it anytime.  I will add that I recently swapped out my regulator with Bayou Classic and that thing is amazing.  I can go anywhere from a trickle of a flame to blow torch.  Tweaking it to slightly adjust temps is a breeze.

    CC Welcome.

    Thanks for looking!

    TJ
     
  2. mfreel

    mfreel Smoking Fanatic

    Looks good.  2 things I'd add.  First, I like using 19mm casings, but it doesn't look like you had much problem with the 17s.  Second, I think you can creep up 10 more degrees to 180.  They're sticks.  Get em done.
     
  3. dirtsailor2003

    dirtsailor2003 Smoking Guru OTBS Member

    Tasty looking sticks.

    Collagen casings aren't as flexible as natural ones so you can't over stuff.

    POINTS!!!!
     
  4. tjmitche

    tjmitche Smoke Blower

    Thanks fellas.. Next time around I think I'll try natural casings and cheat up the temp about 10 degrees.  

    I guess I dont' need to treat sticks entirely like SS.

    Is there a good online resource for natural casings or is it something that should be bought locally and used up rather quickly.

    Thanks Again!
     
  5. tropics

    tropics Smoking Guru SMF Premier Member ★ Lifetime Premier ★

    TJ the sticks look great,you can check Butcher packer,Sausage Maker.their are few google sausage making

    As for handling them here is the best article I have read.

    http://www.smokingmeatforums.com/t/159729/how-to-handle-natural-casings

    I just did some Kielbasa sticks with sheep casing,so I am waiting to see how they come out 2 more weeks.

    Richie

    [​IMG]
     
  6. smokinal

    smokinal Smoking Guru Staff Member Moderator OTBS Member ★ Lifetime Premier ★

    WOW! those sticks look amazing! I get my casings from the sausagemaker.com. They last forever.
     
  7. tjmitche

    tjmitche Smoke Blower

    Thanks Richie! I'll check em out.  

    Let us know how the Kielbasa turns out too! :)
     
  8. tjmitche

    tjmitche Smoke Blower

    Thanks Al,

    I just checked em out. I'm on a mission now to get some sheep casings and do round two.!
     
  9. crazymoon

    crazymoon Master of the Pit SMF Premier Member

    TJM, Nice looking stix, as DS2003 said the collagen casings aren't very forgiving but your work looks great ![​IMG]
     
  10. tjmitche

    tjmitche Smoke Blower

    Thx CM.
    It's fun to share with this group of like minded guys. :)
     
  11. disco

    disco Smoking Guru OTBS Member SMF Premier Member

    Great looking sticks and way better than my first effort.

    Points for great sticks.

    Disco
     
  12. driedstick

    driedstick Smoking Guru OTBS Member SMF Premier Member

    Great job,, I use the collagen casings 22mm love them,, Yours looks great 

    Yep 

    A full smoker is a happy smoker 

    DS
     
  13. redheelerdog

    redheelerdog Master of the Pit SMF Premier Member

    Nice load of sticks! I love the long sticks. Reminds me of the super long Slim Jims. Nice!
     
  14. tjmitche

    tjmitche Smoke Blower

    Thanks Disco, DS & Red,

    Last night I did some more ice smoking [​IMG]....  Hung six lbs of whole muscle venison for the night.  Turned out great!  Venison jerky, the breakfast of champions!  Q-Views are on the way
     
  15. ol smoky

    ol smoky Smoke Blower

    yum! can't wait for the pics
     
  16. boykjo

    boykjo Sausage maker Staff Member Moderator Group Lead OTBS Member

    Sticks look great...............[​IMG]

    [​IMG]

    Boykjo
     
  17. hoity toit

    hoity toit Master of the Pit SMF Premier Member

    I have used both sheep and collegen. each has their merits but all toll I prefer the sheep casing because they are more forgiving as I stuff pretty firm to get that tight look on the finish. Just my 2 cents, and BTW those you made do look pretty darn good for your first shot at it. You gets POINTS on this one my friend.[​IMG]

    HT
     
  18. tjmitche

    tjmitche Smoke Blower

    Thx HT,
    We're definitely going the route of sheep casings next time. If for no other reason than getting some experience with both.
    Take care!
    TJ
     

Share This Page