Smoker Temp Gauge

Discussion in 'Charcoal Smokers' started by harleyguy, Oct 15, 2010.

  1. harleyguy

    harleyguy Smoke Blower SMF Premier Member

    Anyone have suggestions on where I can look for temp gauges for my smoker.I just bought a Brinkmann SNP, starting to do the mods for it. I would like to get a couple with 3 or 4 inch stems.Thanks in advance.
     
  2. pineywoods

    pineywoods Smoking Guru Staff Member Administrator Group Lead SMF Premier Member

  3. Last edited: Oct 15, 2010
  4. scarbelly

    scarbelly Smoking Guru OTBS Member

    Personaly I would not bother with a temp sensor like that. I would recommend that you get something like the Maverick ET73 which is a dual temp (smoker and product) with  a remote read out so you don't have to spend time going to the smoker to check on it.  From what I have seen of the fixed temp sensor prices you will not pay much more for one of the ET73's

    Here is an Ebay link for them

    http://www.amazon.com/s/?ie=UTF8&ke...=aps&hvadid=2961777629&ref=pd_sl_4hcv18hbby_b
     
  5. harleyguy

    harleyguy Smoke Blower SMF Premier Member

    Scarbelly, I have a Maverick, just wanted to put a gauge on the smoker, just in case.[​IMG]
     
  6. dick foster

    dick foster Smoking Fanatic

    If I were you, I'd get a temp controller, a fan and temp sensor of your choice and make a stoker fan for that thing.

    That will not only take care of the thermometer problem but the cooking temp too. It's the only was to go with a charcoal or wood fueled smoker. It makes life so much easier and takes all the fuss out of it.

    You can buy them made up already but they cost way more than they are worth IMHO. If you're at all handy, you can whip one up for less than a hundred bucks that inclues the fan, the digital temp controller, the temp sensor and the little bit of sheet metal that you can bank out yourself in your own garage or even an apartment for that matter. 
     
  7. dearhawke

    dearhawke Newbie

    Is this gauge any where near accurate?
     

Share This Page