SMOKE HOUSE PLANS & MATERIAL'S plus 1st Q-Views

Discussion in 'Smoke Houses' started by tennsmoker, Sep 14, 2012.

  1. tennsmoker

    tennsmoker Smoking Fanatic

    OK SMF, I have looked thru "I think" all the smoke house plan's in the forum, so I said to myself I can do that!!

    I have taken the plunge bought the materials, drawn up some plans & would really appreciate any suggestion's you have or any comment, just want to make sure I am going in the rightr direction, here are some early pic's.

    Thanks ,

    Al

    The plan's:


    3 pieces 4'X8' X 19/32" thick.  Home depot made the 2 cuts on the plywood free. The 1'X72"  (3 pcs) will be used for the back. That way I only had to buy 3 sheets plywood.


    The B/P

    As you can see the overall size is 3ft X 6ft with two doors.


    This is how I plan on fabricating the back.


    The cutouts for the doors.


    The 3 sheets 3'X6' plywood (2 sides & front)


    The 3 pcs on the right are the 1'X6' access (to make the back)


    The 1'X4' strips will be used to strengthen the back panel.


    All the material I bought today: 9-14-2012

    (3) sheets 19/32" 4'X8'  plywood = $71.91

    (2) 2"X4" X12'  for the base = $11.47

    (2) 1"X3" for the back strips = $2.78

    (4) 2"X2" corner strips = 6.52 

    1 box screws = $6.47

    Total = $108.21

    Feel free to comment,

    Al
     
    Last edited: Sep 14, 2012
    jason wilson and farman852000 like this.
  2. jrod62

    jrod62 Smoking Guru Group Lead OTBS Member

    Sound liks a good plan to me.
    Going to pull up a chair, grab a beer and sit back watch .
     
    jason wilson likes this.
  3. tennsmoker

    tennsmoker Smoking Fanatic

    I got my wood all laid out and made one cut "only one" started to rain here in Tenn. Covered everthing up & try again tomorrow....

    Al
     
    Last edited: Sep 17, 2012
  4. scarbelly

    scarbelly Smoking Guru OTBS Member

    Looks like it will be fun to watch 
     
  5. daveomak

    daveomak Smoking Guru OTBS Member SMF Premier Member

    Al, morning.....   How's the build coming ???   [​IMG]  ....  Is it still raining ??     
     
  6. tennsmoker

    tennsmoker Smoking Fanatic

    Good Morning Dave & other SMF Members, for an UPDATE:

    the answer is YES it's raining NOW & has been off & on since I started my build!!  [​IMG](Clarksville, Tn.) 

    Went to Nashville to purchase the burner, same one Pops used in his smoke house, Northern Tools did not have it on hand because it's a seasonal item, but they are in stock for ordering when I get to that point.

    Having to work this project outside because my mustang is in the garage!! bummer!! Won't take long once I get things going.

    Thanks again for inquiring, will post updates & pic's when I make some progress,

    al
     
    Last edited: Sep 17, 2012
    nepas and jason wilson like this.
  7. nepas

    nepas Smoking Guru Staff Member Moderator Group Lead OTBS Member SMF Premier Member

    Looking good TS

    I sure do miss mine back in PA.

     
    jason wilson likes this.
  8. Sorry to hear the weather isn't cooperating, but can't wait to see your building process.
     
  9. tennsmoker

    tennsmoker Smoking Fanatic

    SMOKE HOUSE UPDATE,

    Made some progress today on my smoke house


    The bottom. Installed the 2x4 this way because I will be attaching them to post in the ground.


    Fabricated the back also & cut to 68"


    The 2 sides trimmed to 68" for the side attach

    Maybe more next few days, thanks for looking or commenting

    Al
     
    jason wilson likes this.
  10. shoneyboy

    shoneyboy Master of the Pit OTBS Member

    [​IMG][​IMG]
     
  11. chefrob

    chefrob Master of the Pit OTBS Member

    az
    should be a good one to watch................
     
  12. tennsmoker

    tennsmoker Smoking Fanatic


    Morning SMF,

    One more word about the bottom base, for anyone following that may want to build or just follow my progress.

    As you can see there are two support 2x4's installed in the middle, one of them is to cover the gap where from the two pieces trim from the original 4x8's I had cut off.  Maybe more Q-Views today.

    Al 

    NOTE:

    And by the way Nepas that is a great looking Smoke House you have there.  Mine will be simular not exact, I am using yours & Pops as a pattern. I'm sure you guy's don't mind.

    Al
     
    Last edited: Sep 20, 2012
  13. tennsmoker

    tennsmoker Smoking Fanatic


    Made a litle progress this afternoon. Had to stop to take care of some other chores, her are couple of q-views

    al


    Rack's to hold the rods


    Cutting the racks into 2 pieces


    Sides with racks attached. Just guessed about the location!!  If I remember the top rack was located 59" from the bottom.
     
    Last edited: Sep 20, 2012
    jason wilson likes this.
  14. shoneyboy

    shoneyboy Master of the Pit OTBS Member

    Coming along nicely......[​IMG]
     
  15. tennsmoker

    tennsmoker Smoking Fanatic

    TENN SMOKE HOUSE PROGRESS REPORT,

    started about 9am & quit about 5, working alone so it takes time.


    From top left, the right side, back, front panel's and base all ready to make a smoke house


    Better pic of the front panel, it's upside dwn in this pic


    The side panel ready to be attached


    Another view of the left side being attached, that's my little helper underneath


    Both sides attached or in the process


    Different view of the sides and how I had to hold everything together


    Both sides sides attached and the back panel is next to put on


    Two sides and back panels attached, slow going but it will be worth it when finished.


    Shows to be plumb!!


    Top and bottom plumb


    It's standing on it's own I guess that a good thing..


    Another pic, side view


    Covered it up for the nite might rain,should get the doors finish trimmed tomorrow..

    Hopefully this build will help someone that may start to build a smoke house, I had looked at almost if not all the smoke house threads b/4 I started and gained a little knowledge from quite a few, so thanks to all those that shared their smoke house build. [​IMG]

    al 

    aw yea forget to mention:

    #1 I rec'd the burner from Northern Tools, same burner that Pops & I believe Nepas uses

    #2 If you looked at the original layout the main door cutout was 22 inches wide, I chg'd the width to 26, so I could

    reach into the smoke house better.
     
    Last edited: Sep 27, 2012
    jason wilson likes this.
  16. daveomak

    daveomak Smoking Guru OTBS Member SMF Premier Member

    Al, evening... She's looking good....  Soon there will be wispy TBS rolling out the vents....   Dave
     
  17. tennsmoker

    tennsmoker Smoking Fanatic

    Maybe I need to start a new thread for this question, if I do let me know.

    Need some help with the air inlet and exhaust for this smoke house, the size is 3'X3'x6'. I have purchased 2 mobile home register's

    which measures 4x8, here's the link http://www.homedepot.com/h_d1/N-5yc...ngId=-1&keyword=mobile+register&storeId=10051

    I installed one of them but not sure if I should install the other one!!  Also my exhaust is a 4" elbow with a 2 foot length pipe extension attached. Haven't installed this yet.

    Any help is appreciated,

    al
     
  18. daveomak

    daveomak Smoking Guru OTBS Member SMF Premier Member

    Al, afternoon.... Consider 2 registers for air in and 2 for air out.... I wouldn't think the 4" would be needed...  Dave
     
  19. tennsmoker

    tennsmoker Smoking Fanatic

    Evening Dave,

    I was sorta going by the Q-View that Nepas had sent (see earlier post) on this thread. I purchased the 4" elbow with a 2 foot length pipe extension similar to his. On his smoker he may have another intake and exhaust mounted in the back, I don't know!!

    Correct me If I'm wrong but you are saying that for better air circulation it's best to have the same sq in inlet & exhaust?
     
  20. daveomak

    daveomak Smoking Guru OTBS Member SMF Premier Member

    I was thinking, (that could be bad), you would have good air flow and circulation for moisture and smoke... Put the vents under the eaves on opposite sides.... If need be, if they could close, then when the wind was blowing, the vent might be closed on the windward side.... Also would keep the bugs out when not in use...  Good thorough air circulation is a plus when smoking... There was a smoker built a few months ago like yours.... I'll try to find it... he used 2 vents on the bottom and 2 on the top...   maybe we can get some info on how it worked.....   

    I'll be back......  Dave

    http://www.smokingmeatforums.com/t/126592/done-at-last-the-money-pit-smokehouse-is-finished

    http://www.smokingmeatforums.com/search.php?search=*:*&advanced=1&sort=lastupdate&order=descending&searchtype=thread&createdbyuserid[]=51665

    The top link is Gary's finished project.... the 2nd link is the many threads during his build.....    

    It looks like the basic design is the same and lots of ideas can be used to avoid having to redo stuff....  I'm sure he would answer any questions you may have.....  The burner is one Pops6927 found and has 3 independent burner controls for heat....  seems to work very well for smokers like your design....   

    Hope this helps....    Dave
     
    Last edited: Sep 26, 2012

Share This Page