remote thermo

Discussion in 'General Discussion' started by gopat, Jan 10, 2014.

  1. gopat

    gopat Newbie

    Howdy,

    Just got a new Dyna Glo propane upright smoker and a remote thermometer, I am just wondering where to run the wire for the probes

    looks like the door seals too good and possibly cut the wire, could go down the damper hole in the top or drill a small hole in the side

    any suggestion?

    Thanks
     
  2. gomez93

    gomez93 Meat Mopper

    Many go down the top vent, there is also nothing wrong with drilling a small hole. It won't affect the smoker to any noticeable degree. Also, a modification that is popular on WSMs is to drill a hole and use a brass lamp nipple. That way it can be capped to close it off when not in use.
     
  3. seenred

    seenred Smoking Guru Group Lead OTBS Member

    I'm not too familiar with your smoker, but on my GOSM gas smoker I've always taken the probe wires through the damper vent in the top.  Works great, and I didn't have to do any drilling or mods to make it work.

    Red
     

Share This Page