Protective cover for the MasterBuilt Model #20070508 ?

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
Congrats on your new smoker.
Last years model had them. Maybe Masterbuilt has some, give them a call.



Phone
1.800.489.1581
706.327.5622 (local for Columbus, Georgia)
 
I picked up a generic cover for vertical smokers at Home Depot to fit over my 30" MES. It's plenty big and would fit the 40" with no problem. Has elastic at the bottom.
 
Hello Folks,

Perchance if others are interested I contacted Masterbuilt (1-800-489-1581) as suggested by Forum Member ronp100343 and they have a protective cover for the MES Model #20070508 for $29.00 plus shipping/handing.

Coaster
 
Good deal, happy to help.
 
My guess is that the larger cover is based on the 40" MES. The smaller one sounds like it will fit the 30" fairly well, as long as you don't mind that it could be an inch or two short and thereby wouldn't wrap around the bottom of the cabinet.

I still haven't had any lucking finding anything that will cover the cabinet as well as my smoker. I may have one custom made. For now, I just keep the MES in the garage when I'm not using it. Good luck!
 
What does the cover from the Masberbuilt for the 40" look like....is it pretty durable looking material? I had a Bradley cover for my 30", and it didn't last too long.....need to protect my 40" better.

Does it look as durable as this one? http://www.the-cover-store.com/item_...=Grill%2BBrand (That one actually has a 3 year warranty....ends up being $50 with shipping though....)
 
Not sure about comparison, the Masterbuilt is somewhat thin. I got a tear in mine.
 
That the fear, the one at the Cover Store is probably more durable.....it better be with a 3 year warranty.....Although I'm sure a tear wouldn't be a Warranty issue.
 
Congrats on the MES Coaster. I think you will find it to be a pretty neat fixture on your back deck/patio. I love mine & use it about 2-3 times per week. It's going right now.........
 
BUMP!!!

Everyone happy with those "Cover Store" covers?

http://www.the-cover-store.com/item_...de=CSP06146KH2

I have been glassing the Kahki 32x32x40 for my 40" MES. Want to know if you guys feel that the quality is worth the 40 bucks. Looks like good schtuff to me!

The 3 year warranty is also cool beans and says something about the product quality too!
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky