Protective cover for the MasterBuilt Model #20070508 ?

Discussion in 'Electric Smokers' started by coaster, Feb 15, 2009.

  1. coaster

    coaster Newbie

  2. ronp

    ronp Smoking Guru OTBS Member SMF Premier Member

    Congrats on your new smoker.
    Last years model had them. Maybe Masterbuilt has some, give them a call.



    Phone
    1.800.489.1581
    706.327.5622 (local for Columbus, Georgia)
     
  3. scubadoo97

    scubadoo97 Smoking Fanatic

    I picked up a generic cover for vertical smokers at Home Depot to fit over my 30" MES. It's plenty big and would fit the 40" with no problem. Has elastic at the bottom.
     
  4. ne.hunter

    ne.hunter Fire Starter

    I use a bradly cover for my 30 mes that has a drawstring on it works great
     
  5. coaster

    coaster Newbie

    Hello Folks,

    Perchance if others are interested I contacted Masterbuilt (1-800-489-1581) as suggested by Forum Member ronp100343 and they have a protective cover for the MES Model #20070508 for $29.00 plus shipping/handing.

    Coaster
     
  6. ronp

    ronp Smoking Guru OTBS Member SMF Premier Member

    Good deal, happy to help.
     
  7. scubadoo97

    scubadoo97 Smoking Fanatic

    This cover was around $10 if interested
     
  8. rodbuilder

    rodbuilder Meat Mopper SMF Premier Member

  9. donnylove

    donnylove Meat Mopper SMF Premier Member

    If you look closely at the drawing with the dimensions on it (near the bottom of the page), this cover appears to be custom made for a MES . . . I only wish they'd make one tall enough to cover my mounting cabinet as well!

    http://www.the-cover-store.com/item_...=Grill%2BBrand
     
  10. donnylove

    donnylove Meat Mopper SMF Premier Member

    My guess is that the larger cover is based on the 40" MES. The smaller one sounds like it will fit the 30" fairly well, as long as you don't mind that it could be an inch or two short and thereby wouldn't wrap around the bottom of the cabinet.

    I still haven't had any lucking finding anything that will cover the cabinet as well as my smoker. I may have one custom made. For now, I just keep the MES in the garage when I'm not using it. Good luck!
     
  11. jr.s

    jr.s Fire Starter

    What does the cover from the Masberbuilt for the 40" look like....is it pretty durable looking material? I had a Bradley cover for my 30", and it didn't last too long.....need to protect my 40" better.

    Does it look as durable as this one? http://www.the-cover-store.com/item_...=Grill%2BBrand (That one actually has a 3 year warranty....ends up being $50 with shipping though....)
     
  12. ronp

    ronp Smoking Guru OTBS Member SMF Premier Member

    Not sure about comparison, the Masterbuilt is somewhat thin. I got a tear in mine.
     
  13. jr.s

    jr.s Fire Starter

    That the fear, the one at the Cover Store is probably more durable.....it better be with a 3 year warranty.....Although I'm sure a tear wouldn't be a Warranty issue.
     
  14. fishawn

    fishawn Smoking Fanatic

    Congrats on the MES Coaster. I think you will find it to be a pretty neat fixture on your back deck/patio. I love mine & use it about 2-3 times per week. It's going right now.........
     
  15. insight

    insight Meat Mopper

    BUMP!!!

    Everyone happy with those "Cover Store" covers?

    http://www.the-cover-store.com/item_...de=CSP06146KH2

    I have been glassing the Kahki 32x32x40 for my 40" MES. Want to know if you guys feel that the quality is worth the 40 bucks. Looks like good schtuff to me!

    The 3 year warranty is also cool beans and says something about the product quality too!
     
  16. rdknb

    rdknb Master of the Pit OTBS Member SMF Premier Member

    I got the home depot one for vertical smokes, I am guessing it would work too
     

Share This Page