New member

Discussion in 'Roll Call' started by ba_loko, Jul 27, 2007.

  1. ba_loko

    ba_loko Smoking Fanatic OTBS Member

    Greetings, all. I just wanted to do a drive by howdy to you all and introduce myself. I'm from Broken Arrow, OK.

    Tomorrow I'm going to smoke some ABT's, some Fatties, some chicken halves, some Earl Campbell links, and a pork tenderloin. If I can figure out how to post pictures, I'll be posting those.

    Kev
     
  2. johnd49455

    johnd49455 Smoking Fanatic OTBS Member

    Welcome to SMF.

    Lots of info round these parts.
     
  3. ba_loko

    ba_loko Smoking Fanatic OTBS Member

    I'm trying to figure out how to post a pic.
     
  4. meowey

    meowey Master of the Pit OTBS Member SMF Premier Member

    Welcome to SMF! Glad you found us!

    Take care, have fun, and do good!

    Regards,

    Meowey
     
  5. hillbillysmoker

    hillbillysmoker Master of the Pit OTBS Member

    Welcome to the forum. Nice to see you here. Please feel free to join in and to get to know the fine folks here.
     
  6. blackhawk19

    blackhawk19 Master of the Pit OTBS Member

  7. gypsyseagod

    gypsyseagod Master of the Pit OTBS Member

    great pics & welcome to smf.
     
  8. ba_loko

    ba_loko Smoking Fanatic OTBS Member

    Thank you, Blackhawk. I've read quite a bit of Debi's site. Access to her knowledge is quite a treasure!

    I'll check into the 5 day e-course. Thank you!
     
  9. ba_loko

    ba_loko Smoking Fanatic OTBS Member

    TY to everyone for welcoming me. I've been lurking for awhile and enjoying the posts.

    Meowey, I've got the very same smoker that you are awaiting delivery on. I hope you enjoy it as much as I enjoy mine.
     
  10. richoso1

    richoso1 Smoking Guru OTBS Member SMF Premier Member

    Welcome to the SMF. I hope you enjoy your stay here. Those are nice Q Views you posted, They look ready to eat!
     
  11. deejaydebi

    deejaydebi Smoking Guru

    Welcome Kev -

    Nice job on the smoke! Looks really yummy!
     
  12. desert smokin

    desert smokin Smoking Fanatic OTBS Member

    Welcome aboard. Look forward to hearing about your smokes and seeing lots of Q-views.
     
  13. johnd49455

    johnd49455 Smoking Fanatic OTBS Member

    Have you done any mods to your chargriller? I looks like (by your wonderful pic) you use the side firebox. Do you have a problem with getting to hot right by the firebox? Your meat looks so evenly done. When I put a lot on my Chargriller it gets burnt by the firebox if I don't move things around alot.

    Any pointers anyone?

    If I don't overload it everything comes out pretty even.
    [​IMG]
     
  14. ultramag

    ultramag SMF Events Planning Committee

    Welcome to SMF BA LoKo!!! Nice looking pics.
     
  15. ba_loko

    ba_loko Smoking Fanatic OTBS Member

    John, I do have to rotate the meats to keep them evenly cooked. I read just yesterday somewhere here in the forum about some mods. I went out and got a flexible hose to put inside on the chimney. I went to Lowe's and got the parts to do that and I'm going to try it today. I wasn't able to find the high temp "rope" to put around the edges though so I'll still have leaks. My temp gauge reads about 175 to 190 on the lid though....and that's always bothered me a bit. I suspect my actual temp is actually higher at the cooking level.

    Thanks to whoever it was that posted their mods on their blog!

    Kev
     
  16. doc

    doc Meat Mopper

    Looking delicious! Great work...keep the Q views coming!

    Welcome aboard!
     
  17. hawgheaven

    hawgheaven Master of the Pit OTBS Member

    Welcome aboard Kev!

    I also have the CharGriller and yes, it does need a few mods right out of the box, one of which you are already doing... the chimney mod.

    The CG is notorious for that hot spot at the firebox end. If you are gonna use it strictly as a smoker and not a charcoal grill, then install a permanent baffle at the opening into the chamber. If not, you can flip the charcoal tray upside down and hang it above the top of the opening... that serves the purpose pretty well.

    Also, DO NOT depend on the stock temp guage... it isn't worth the hole it mounts in! Get yourself a grill surface temp guage, or an oven temp guage, they're not expensive. Or, for around $40, you can get a Maverick ET-73 remote digital that has dual probes - one for the food and one for the chamber grate temp. You can also install a quality guage (or two) in the lid at grate level. I installed one at each end of my lid to monitor temps from end to end.

    So, there you have it. You have a great piece of equipment, and with a few mods, you'll have an even nicer one! Good luck!
     
  18. ba_loko

    ba_loko Smoking Fanatic OTBS Member

    Thank you, Phil. I've got 3 digital thermometers. One is a single probe, another is a dual probe, and the last is a single probe with wireless monitor. Are you saying I can simply lay one probe on the grate for an accurate reading? That almost sounds too easy.
     
  19. az_redneck

    az_redneck Smoking Fanatic OTBS Member

    Howdy from sunny Arizona...[​IMG]
     
  20. gypsyseagod

    gypsyseagod Master of the Pit OTBS Member

    lol sunny arizona.
     

Share This Page