Need help sealing back of Chargriller Smoking Pro

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

ryson96

Newbie
Original poster
Mar 7, 2016
24
13
Baltimore,MD
Hey guys

I need help figuring out a way to seal the back of my Char Griller Smokin Pro. I have drilled ledges around the sides and front of the smoker and glued rope gasket on it and the seals are great! i just cant do that to the back because of the lid. I would like to keep it cheap and hopefully get it from lowes or home depot, 

Any info would help!

Thanks!
 
If it's setup like mineand you have a welder I'm going to take the top off flip it upside down and weld some small angle down the sides and along the back and put the rope in that channel so when it closes it contacts the bottom edge of the cook chamber and seals it
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky