Mes Door Gasket

Discussion in 'Electric Smokers' started by bamafan, May 7, 2010.

  1. bamafan

    bamafan Smoking Fanatic OTBS Member

    My gasket is pulling off the door of my MES and I was going to autozone this weekend to buy some High temp RTV to try and glue it back on. Has anyone used something better that had this problem?
     
  2. jamminjimi

    jamminjimi Meat Mopper

    3M 08001 or equivilant in black. AKA Gorilla Snot
     
  3. Now there's a visual I didn't need![​IMG]
     
  4. scubadoo97

    scubadoo97 Smoking Fanatic

    The high temp RTV silicone sealer should be fine. You can search for food grade RTV but most of these sealers are pretty much the same. Not going to give off toxic fumes. These emit acetic acid as it cures but that's about it.
     

Share This Page