Master Forge conversion to home LP system

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

tbird1600

Newbie
Original poster
Dec 26, 2013
2
10
Has anyone converted from the stock LP tank to a home system?

I already have a home LP system running to fireplace and grill -- it would be convenient to come off this line to the smoker -- any issues and thoughts would be appreciated.
 
I have propane heat for my home. I just T'd off the gas line on the low pressure side (after the regulator). Put a valve and a quick connect fitting. You can get quick connects at local gas house BBQ supply. I then took regulator off my gas grill. Put a length of rated hose from grill to mating quick connect. I can "unplug" the grill and move it away when not in use. Haven't bought bottled propane in many years.
 
Thanks -  Figured it would be no problem -- but was not sure what the MF manual means when it says "This unit is not to be utilized with a non-self contained LP gas supply system."
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky