Looking for help

Discussion in 'Electric Smokers' started by niniron, Apr 10, 2008.

  1. niniron

    niniron Fire Starter

    I'm trying to figure out the best place/method to put the wood in my ECB electic smoker. My last smoke I put a rack above the element and put the chips in a smoker box. I quickly learned that was not the going to work so i just put some next to the element. Is that the best way or am i missing something.
     
  2. fireguy

    fireguy Smoking Fanatic

    Id set it right on the element. good luck
     
  3. kookie

    kookie Master of the Pit OTBS Member

    you could always try putting your chips in a foil pack...............
     
  4. bbq bubba

    bbq bubba Master of the Pit OTBS Member

    Setting them on the element usually ignites the wood pretty fast...

    They should go next to the element on the lava rocks, if you don't have rocks, the unit should have a pan!
     
  5. geob

    geob Meat Mopper SMF Premier Member

    Wood, element, hmmmm FIRE.. Foil or pan will solve this.


    geob
     
  6. fireguy

    fireguy Smoking Fanatic

    I have a pan that sits right on top of my element, foil pack chunks, drop it on the pan, and the TBS works its magic... never had a prob yet.
     
  7. desertlites

    desertlites Master of the Pit OTBS Member

    I have a ECB with a hotplate-put a shallow can of chips off to 1 side as not to rob the heat-works great.and ya I also added lava rocks under and around.
     

Share This Page