help pls

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
depending on how you got it saved you should be able to edit the picture, it will give you choices on size, the better softwares have a best for net option that is automatic, otherwise just make sure it shows the file size as less than the maximum allowed here. jpg has alot higher limit that the other formats, the file size allowed is listed on the popup for attachments, hope that helps, there is a test area if you want to play around but this was your thread so I'll toss a horizon rd special up just for kicks
8572be3d_vbattach20563.jpg
 
Keep in mind that if you weld stainless steel with regular mild steel welding wire, it won't have the nickel in the wire and all the places you weld will still rust. They make stainless wire and rods, don't know what your using. Regular expanded steel is fine, just season it and keep it sprayed with cooking spray when not in use. Just don't want you to spend the extra time and money and then see rust spots anyway.
 
SS is expensive but lv'e been told a good grade will last almost forever.I just ordered a 17" by 24" on line.Cost--$115.00 for 5/16" solid ss. cooks great.
icon_smile.gif
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky