gulfcoast griller

Discussion in 'Roll Call' started by buffalosurfer, May 31, 2008.

  1. buffalosurfer

    buffalosurfer Newbie

    Just wanted to introduce myself.
    My name is Jim and i'm in venice florida and i'm moving into my new addiction.
    Got myself a charbroil silver smoker that i used grill this last memorial day.
    but i've been burning charcoal for years.
    looking forward to smoking!
    Just looking for the mods and the recipe's.

    thanks for the sticky tips in advance.[​IMG]
     
  2. richtee

    richtee Smoking Guru OTBS Member

    Welcome! You should consider moving to lump charcoal, if yer not using that. The 5 day Ecourse is excellent for beginners as well.

    And lots of mods for that machine... charcoal basket first, tuning plates next...
     
  3. richoso1

    richoso1 Smoking Guru OTBS Member SMF Premier Member

    Hello Jim, glad to have you with us at the SMF. Read around the forums, plenty of advise on mods and recipes too!
     
  4. buffalosurfer

    buffalosurfer Newbie

    charcoal basket? do you have the same unit? hoping the existing grate will work to start and a custom grate and pan for easy ash removal.

    going for the first smoke tomorrow. young small turkey breast, mesquite, lump charcoal.

    drilled 2 better temp guages. one by firebox and one on stack end. trying just a foil basting pan to extend the heat to center and a little heavy duty foil on the lower charcoal great as makeshift tuners. looking for a tin can to extend the stack down a scoshe.
     
  5. earache_my_eye

    earache_my_eye Smoking Fanatic OTBS Member

    You're heading in the right direction....keep reading the previous threads about mods for your smoker.....lots of info to be found/shared here......oh, and WELCOME to the SMF!

    L8r,
    Eric
     
  6. vlap

    vlap Master of the Pit OTBS Member SMF Premier Member

    Glad to have you here... many good mods for your smoker. pm me for a link...
     
  7. smokin out the neighbors

    smokin out the neighbors Smoking Fanatic SMF Premier Member

    Welcome to SMF Jim. Glad to have you here. Be sure to share your smokes w/ us by posting Q-view.
     
  8. buffalosurfer

    buffalosurfer Newbie

    like that idea tex. angle iron support on the bottom and a tray underneath perhaps.

    Thanks for all the help. i'll have a few bumps i'm sure but with the amount of knowledge i've got in the short period i've had here i'll be the talk of all my daughter's friends and families.
    Gracias!

    I'll keep ya informed of the newb's progress. the 7 year old daughter will be assisting.
     
  9. kookie

    kookie Master of the Pit OTBS Member

    WElcome to the smf................Glad to have you here..............
     
  10. sumosmoke

    sumosmoke Master of the Pit OTBS Member SMF Premier Member

    Welcome to SMF, Jim from one FL member, to another! I'm on the east coast of the state near New Smyrna Beach. Lots of FL folks here that may drop by to say "hello" to ya!

    Glad you've realized this will be an "obesssion". It's become one for me and I'm loving every minute of it!! [​IMG]
     
  11. seboke

    seboke Master of the Pit OTBS Member SMF Premier Member

  12. seboke

    seboke Master of the Pit OTBS Member SMF Premier Member

  13. flash

    flash Smoking Guru OTBS Member

    Welcome from another Floridian. Cedar Key area, west of Gainesville. You'll learn alot here. [​IMG]
     

Share This Page