ECB Charcoal pan grate

Discussion in 'Charcoal Smokers' started by smoking asian, Dec 30, 2009.

  1. smoking asian

    smoking asian Newbie

    I have an ECB Smoke N Grill and I've done all the mods, but I can't find a grate to fit in the charcoal pan to lift the charcoals off the bottom. I've found some metal shops, but it's going to cost more than I want to pay. Does anyone have any cheap ides that might work? I thought about getting one of those cookie cooling racks and bending it, but even those are $15 bucks.
    Thanks guys.
     
  2. fire it up

    fire it up Smoking Guru OTBS Member

    Saw no answers yet so...
    Bump.
     
  3. mulepackin

    mulepackin Master of the Pit OTBS Member SMF Premier Member

    I believe I used a replacement charcoal grate for a Weber Smokey Joe, that I purchased from my Local Ace Hardware. I don't see one on the Ace website, and it might be a seasonal item at the store, but they could have one stashed in back. It's available on Webers website; http://store.weber.com/Items/Accesso....aspx?pid=1357. Another option if your handy, is to buy a small piece of expanded metal at your local home store, and cut it down to fit.
    [​IMG]
     
  4. howufiga

    howufiga Meat Mopper

    I bought a generic replacement from Menards. It was $7 I believe. Its no where near as sturdy as the weber smokey joe grates. It's flimsy and bends, but it works. You can always order a smokey joe grate from amazon.com
     
  5. smoking asian

    smoking asian Newbie

    I think we have an Ace's nearby. I'll try there. I made some calls to metal shops and they weren't bad, but I've already put too much money into modding this thing.
     
  6. tn_bbq

    tn_bbq Smoking Fanatic

    Can you get an old/replacement grate off a grill and just cut it down to size?

    Seems there's always somebody throwing a grill away or putting it on Craigslist. Then break out the hacksaw or dremel.

    I think I managed to find a grate at Home Depot. I think it was the charcoal grate (not grill) for the Weber kettle. Do some measuring and head to the hardware store.

    http://www.shop.com/Weber+7439+Charc...82902-p+.xhtml
     
  7. csmith2884

    csmith2884 Meat Mopper SMF Premier Member

    Mine was just a grate for a smaller round grill fits perfect.
     
  8. billbo

    billbo Master of the Pit OTBS Member

    Exactly what I use. Fits perfectly.
     
  9. mulepackin

    mulepackin Master of the Pit OTBS Member SMF Premier Member

    My Smokey Joe grate gets a little sag after a few uses too. I kinda set the bolts too high in the first place, so with the sag, it sits about an inch up which is about perfect.
     

Share This Page