Downdraft hood for Traeger

Discussion in 'Pellet Smokers' started by jleeman, Nov 10, 2014.

  1. talan64

    talan64 Meat Mopper

    I have never used one, and have not had any issues even on windy days.

    I'll bet you could make a similar device for a lot less than 80 bucks, just to try out.
  2. A solution in search of a problem?
  3. okie52

    okie52 Fire Starter

    Just got a downdraft hood for Christmas from Pelletaccesories.  I plan on attaching it in the next few days.  Will post pics.  
  4. westby

    westby Smoking Fanatic

    I purchased a 3" elbow for less than $3 to simulate the downdraft hood.  I think it helps.  Go pick one up from your local hardware store / man's mall and see if you notice it helping at all.  If you like it and want something fancier, get the fabricated one.
  5. okie52

    okie52 Fire Starter

    Maybe.  I installed mine yesterday.  Theoretically it will keep smoke in the chamber longer as well as even out temps in the chamber and along the grate.  

    If the amount of smoke being generated by a pellet smoker is an issue then this might help. 
  6. okie52

    okie52 Fire Starter

  7. okie52

    okie52 Fire Starter

    I'll now testify to the fact that the addition of the downdraft hood has greatly improved the smoke generated from my traeger Texas. Evidently the greater retention of heat causes the fan/auger to oscillate with greater gaps which produces more smoke.

    I am no longer using a smoke generator and the smoke now produced by my traeger is greater at 275 and below now than it was with my old traeger temp controller.

    As happy as I was with the smoke daddy big kahuna and Amazn tube smoke generators I look forward to no longer needing them.
  8. loock28

    loock28 Fire Starter

    I have one on my blazin grill works and love it I got it for the reason of even heat across the grates and it has worked very well. it also helped with added smoke flavor. I lucked out and got mine from a guy who bought it and never installed it at a lower price.
  9. bruski

    bruski Newbie

    what does the other side of that look like it is just a big bell style hood ?    or is it just a triangle that hoops over the vent hole?
  10. loock28

    loock28 Fire Starter

    the back side looks the same as the front except there is a hole at the top were the outlet for your smoker is. mine has 4 threaded holes basically i put bolts through the smoke stack and they threaded into the down draft hood. it was a little bit of a pain trying to get it all lined up but the wife helped and was done in like 10 mins
  11. rceagle1

    rceagle1 Newbie SMF Premier Member

    I have the Second add on rack in my lil tex elite, will this hood work with that or I have to mod the second shelf to work?

Share This Page