Digi Guru & the cold?

Discussion in 'Slicers, Grinders, Tools, Equipment' started by inkjunkie, Dec 29, 2014.

  1. inkjunkie

    inkjunkie Master of the Pit

    Went to use it today. Plugged it in, the display lit up. Had the blower motor hooked up, pit probe clipped onto the grate of the BGE. No meat probe connected. Set the pit temp at 375*. No blower action. Air temperature was right around 14* or so...wind chill made it right around 0*. Does the Guru not function in this type of chilly weather? I have used it in the past but the air temperature was closer to 45*....

Share This Page