Deer Bologna

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

mrh

Meat Mopper
Original poster
Dec 24, 2006
219
12
Iowa
Got a recipe from a member on the Bradley site for this, so I decided to give it a try. Ordered a couple 4 inch casings and it is in the smoker right now. Boy what a whopper, the recipe makes 10 lbs and it all fit in the one casing!! Any biger and I couldn't have fit it in the Bradley! So here is a pic of it when I first started it, I had to remove the v tray so it would fit. After a hour to dry, I moved the tray behind so there wasn't direct heat from the lamp on one side and the pucks wuold feed. Here the fiirst pic.
 
Well its been 6 hours now and the meat temp is in the low 90's but I am only at 160 deg.chamber now moving things slow so I don't overcook the outside before the center gets done. I have been moving the temp up every 2 hours by 10 degrees.
 
Yes air thats one big casing there for sure. Now I also cann't wait for the finishing Qview either so make sure you post them up now.
 
Thats Huge MRH! I think it will be a long night, but it will be worth it for sure.
 
This should really be great!

10 degrees every 2 hours???
Somebody has a lot more patience than I have!


Bearcarver
 
Coming up on 11 hours now meat temp at 120 and smoker moved to 180. So I am hoping it will be done before it's too late. Maybe I will have to move the temp up a little more yet, we will see how things go.

Mark
 
points.gif
for trying the big casings. Let us know how it turns out!
 
Finally got done hit 154 at 17 hours total. The final smoker temp I ended up was 205, I ws getting sleepy so pushed it along. Right now it is in a lug with snow and water so while it is cooling I figured I would post. I will have some pics tomorrow of the finished product with more after I get it sliced. Time for this guy to get some sleep morning will be here too soon!!

Mark
 
Can hardly wait to see finished pics. I don't know as I have the patience for a 17 hour smoke though.
biggrin.gif
 
Ok here are the finished pics for now, more to come when I slice it tomorrow night. This guys butt is dragging tonight! One is in a meat lug right after removing from the smoker, with snow and water cooling it down, and the other is me holding the big sucker tonight.









Mark
 
The recipe is in the book "Great Sausage Recipes and Meat Curing"

Deer Bologna
For German Bologna use Lean Beef instead of venison
For 10 lbs:

7 lbs venison
3 lbs pork butts
1 tsp ground white pepper
3 Tbs ground mustard
1 Tbs ground celery
1 tsp ground nutmeg
1 tsp ground coriander
1 tsp garlic powder
4.5 Tbs powdered dextrose
2 cups soy protein concentrate (or Substitute with Non Fat Dry Milk)
2 cups ice water
2 tsp Instacure #1 (DQ Curing salt #1, Prague Powder #1, pink salt)
4 Tbs salt

Grind meat through 3/16' grinder plate. Mix ingredients and distribute evenly, add water as you go. Bologna is usually stuffed into 8" diameter casings but 3.5", 5" or any size that is handy will work too. Hang at room temperature until casings are dry. Place in preheated smoker at 165 degrees. until internal temp reaches 150 degrees. Remove and cool in a water bath until internal temp is brought down to around 90 degrees. This type of bologna is usually not smoked. If you like a more store bought look, be sure to emulsify the meat while grinding.
 
Ok here they are the finished pics. Tastes good still kind of salami like, but it will fit very nice on a slice of bread. Actually this was half with cheese and the other half plain. I forgot to throw in the cheese until we had already stuffed the first half so added cheese and finished on the second half. First pic is all of it sliced up and the second is vacum sealed and ready for the freezer. Thanks for all the nice comments, Mark
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky