A good example

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

richoso1

Gone but not forgotten. RIP
Original poster
OTBS Member
SMF Premier Member
Jun 21, 2007
8,432
41
I've been going back and forth with kew_el_steve about some his GOSM mods, and he has been very helpful, sincere, and friendly. This is what I consider a great example of a knight of the OTBS, and general membership too. He truely responds to another brother.
 
I agree
PDT_Armataz_01_34.gif
 
This was his original thread
http://www.smokingmeatforums.com/for...ead.php?t=9279

I later asked if the original door hinges were riveted, bolted, or screwed on. he said screwed on, easy to replace with SS. I then asked about how he bolted the legs down, as I could not see the bolts from his pictures. He said he actually drilled a hole right on the welded seam, very carefully. You might PM or email him on anything else, he's very receptive. Hope this helps you.
Richoso1
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky