(2) Stainless Steel 55gal Drums

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

bcpdesigns

Newbie
Original poster
Apr 28, 2013
24
10
Disclaimer: I looked for a minimum post count and I couldn't find one, sorry if I am breaking any rules.

Two good condition very heavy duty 16 ga stainless steel drums, don't have the funds to build right now so I am going to pass these on to someone else for a heck of a steal. I have found this style online for $2000 each new. Now these aren't new but they are in good shape. I am wanting to get about $300 each, if you buy both I will make a good deal on them for you. I can deliver within about 200 miles of me (47944) for the cost of gas (14mpg). Prefer texts @ 765-413-3186 but messages here would be alright too. Any questions just ask.



Also, these are one piece construction. And I guess as long as it isnt more than 4hrs one way away I'm fine with delivering as long as it is on a Saturday
 
Last edited:
I'll also take offers on these, or possibly trade for idk what.
 
Willing to make a deal on these, both for $400 plus cost of gas to deliver. I'd do $250 for one.
 
I would have been all over it if the dang lid came off.    Looking at the picture i'm curious whether if the steel band at the top was cut off that the lid would come off?   Probably not but who knows...
 
I have some good news and some bad news, Good news I figured out that the lids do come off, they have been at a buddies for a few weeks so I didnt look at them for a while. Bad news, I can't figure out how to get them off. It's obvious that they can come off though.
 
Come one someone has to want these, they are extremely solid. weigh probably 70lbs each. And ill negotiate on price.
 
Ill be honest, I don't know and i can't tell. When i look inside them they are just clean.
 
Guys I'm getting kinda strapped for cash and id like to make a deal for someone.
 
That thick band is the rim of the lid, and they seal excellently because I havent finished trying to beat them off yet
 
I'm thinking you can either cut that thick band and the top pops off...or cut at the very top of the band all the way around and it pops off.   Can't seeing that band being part of the lid, it's just holding the lid on. 
 
Last edited:
Up close it look like the ld should come off but I unfortunately had my little brother stick his arm in the fill hole on top and said that the inside is rounded off at that seam which tells me that that thick band is just for reinforcement like the other two that are 1/3 of the barrel apart. so I guess no dice on a lid
 
I would really like to make someone a deal on these, i still have them.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky