Door Blew off Smoker

smay727 · Mar 23, 2016

IMAG1025.jpg

smay727
Mar 23, 2016

Was preheating my MasterBuilt smoker to 225 when inside the house I heard what I thought was the door to the garage slam shut. My teenage daughter thought it was the garbage truck. Any way after looking in the garage and seeing no truck I got my pork shoulder ready and headed out to the back porch to smoke it. This is what I found. The door had blown clean off only hanging on by the bottom hinge. I had to remove the top pin and straighten it out and tighten the clamp on the door as it had stretched. Re installed the door, now the shoulder is on the smoke albeit 1 hour behind schedule.

It was my first time using the water pan and the vent on the top had become a little dirty from the smoke. This is my 5 or 6th time using it. My guess is the smoke and steam build up did the damage. I've opened the vent a bit more and hopefully that solves the problem. Just glad no one got a face full of door. Anyone else have this happen or heard of it ?

Steve M

bdskelly · Mar 23, 2016

Holy cow! errr i mean Pork Butt. I've read a million threads on SMF. This is a first! I'd say no way that pressure could have built up from steam and do that.

Was your vent closed?

Might call Masterbuilt Customer service on this one. Bet they give you a new unit.

B

daveomak · Mar 23, 2016

Sounds like you had a "flash over" that blew the door off... That happens often in MES 30's if the conditions are right.... Exhaust partially closed, not enough air going in to burn the combustibles... Had the chip chute not been locked, the chip chute would have been out in the yard and the door may have survived.....

dirtsailor2003 · Mar 23, 2016

Must of had a batch of Atomic Buffalo Turds go off in there!

jcbigler · Mar 23, 2016

Seems unlikely. Sure you didn't get a big gust of wind that took it off? We've been having 40-50mph gusts of wind here the last few days.

bdskelly · Mar 23, 2016

DaveOmak said:
Sounds like you had a "flash over" that blew the door off... That happens often in MES 30's if the conditions are right.... Exhaust partially closed, not enough air going in to burn the combustibles... Had the chip chute not been locked, the chip chute would have been out in the yard and the door may have survived.....

Gotta ask you brother Dave. "flash over" What is it?

Bearcarver · Mar 23, 2016

If you had the door closed, which I assume you did while preheating, I would agree with Dave.

Some guys have had their unlocked chip dumper blown out from the pressure.

That would take a lot of pressure, but the top hinge might have been sprung already at the time.

Glad you're back up & running.

BTW: I don't think the water in the Pan will do you any good----I've kept mine dry for 6 years now.

Bear

daveomak · Mar 23, 2016

BDSkelly said:
DaveOmak said:

Sounds like you had a "flash over" that blew the door off... That happens often in MES 30's if the conditions are right.... Exhaust partially closed, not enough air going in to burn the combustibles... Had the chip chute not been locked, the chip chute would have been out in the yard and the door may have survived.....

Click to expand...

Gotta ask you brother Dave. "flash over" What is it?

In a smoker or house or barn..... it is where the air is filled with combustible smoke particles from a smoldering fire.... when the oxygen mix get just right and a spark or burning ember is just right, the smoke particles ignite in a violent explosion.... many folks with the MES 30, have noted it here on the forum...

I think it is because the 3 small inlet holes in the chip loader tube are inadequate for proper air flow.... I had it happen to my MES 30 twice... then I drilled out the 3 holes to increase the make up air and it never happened again, I also leave the exhaust wide open at all times when smoke is being generated...

Remember, smoke is comprised of volatile distillates of the wood chips...

Another danger is that smoke contains flammable compounds. With increased oxygen, these can ignite either through open flames or by their own temperature. This leads to a backdraught or flashover effect.

http://sciencelearn.org.nz/Contexts/Fire/Science-Ideas-and-Concepts/What-is-smoke

foamheart · Mar 23, 2016

I have done it with my MES30. Vent wide open, the re-loader unlocked and cracked open and a big handfull of really dry chips in the pan. It would shoot that reloader tube with enough force to got 10 or 15 feet. Too much air in the combustion cycle. Just reduce the air flow, either close the tube or partially close the vent. It was just the chips reaching their flashpoint.

It was cool, sounded like one of those reproduction cannons going off. *POOF**

I had to do it twice more. Once to see if I could and the second to show the neighbor. You know how it is, "oh yeah, you gotta see this....." LOL

Mine was too much air, chips too dry. But I am amazed that it blew the door off....LOL Do it again, do it again...LOL

gearjammer · Mar 23, 2016

Yep, never had the smoker do it [yet], but I've

had the wood stove do it many times.

You hear this kind of poof and look at the stove

there will be a puff of smoke coming out of every crevice.

Of course the stove is much heavier and it

doesn't damage anything.

But when everything gets just right - - - - - - -.

Keep on smokin' Ed

stainless · Mar 24, 2016

I had mine do this a few days ago. I was doing some of the mods to get more smoke. I took the divider out from between the element and the chip tray. Drilled holes in the chip tray and then went to test it out. Seems like about five minutes later, I hear a whoosh sound and see the smoke blow out the vent hole. Opened the door and the chips were on fire. The mod was a little too extreme and the gas inside the cooker combusted.

Sent from my iPhone using Tapatalk

jeepdiver · Mar 24, 2016

Same thing can happen with a pellet grill. That is why they say open the door when lighting them.

bugman36092 · Feb 19, 2017

Mine did the exact same thing this morning. I have a Masterbuilt 30" electric smoker although my door got bent as well as blown completely off, it was laying about 2 feet from the smoker.

ab canuck · Feb 19, 2017

Wow, Crazy, I would not have thought that would have been possible with these, Learning lesson...

dward51 · Feb 19, 2017

I suspect it is wood gas from the chips igniting. It is basically what off gasses from wood chips in a limited oxygen environment at a certain temp range. It will burn just like any other hydrocarbon gas.

https://en.wikipedia.org/wiki/Wood_gas

agnesjaneen · Feb 28, 2017

I have a Char-Broil H20 electric smoker that normally works great. But one fine day . . .

Getting ready to smoke up some beef jerky, I turned on the smoker to preheat it. I also poured a couple of cups of Apple wood chips over the cal-rod heating element. Went back inside to finish arranging the meat on the shelves.

I was in the kitchen about five minutes later when I thought a bomb went off outside.

Then I heard a lound CLANG! I looked out the window where the smoker was and all I saw was a cloud of smoke. I went outside, the smoke cleared and the smoker lid was about ten feet from the smoker, on the deck. Wisps of smoke were coming out of the barrel of the smoker, which was all askew.

My best guess is the chips let off enough smoke to fill the smoker, then got a whiff of fresh air and caused a backdraft. I've seen several of those during my career as a firefighter, but never heard of one in a smoker. But, come to think of it, a smoker with a tight lid is an ideal candidate for such an event.

Door Blew off Smoker

Newbie

Smoking Guru

SMF Hall of Fame Pitmaster

Epic Pitmaster

Smoking Fanatic

Smoking Guru

Gone but not forgotten RIP

SMF Hall of Fame Pitmaster

Gone but not forgotten. RIP

Master of the Pit

Fire Starter

Smoking Fanatic

Newbie

Master of the Pit

Master of the Pit

Newbie

Similar threads

Hot Threads