curing chamber

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

pc farmer

Epic Pitmaster
Original poster
Staff member
Administrator
OTBS Member
★ Lifetime Premier ★
Feb 17, 2013
16,293
6,005
Central Pa
I am going to build a curing chamber.

I need some info and pics if anyone wants to share.

I am thinking of using a over/under fridge.


Thanks
 
Sounds awesome Adam, I will be watching as I'd sure like to have one some day as well.... I won't be much help on ideas.... But I'd like to see what folks say & also see what ya end up doing !
 
Small chest freezer and the appropriate controls and such...no cutting holes...no fuss...no BS!
Up and running in about 10 minutes.

Wow. Nice.

And you can hang meat?
 
  • Like
Reactions: pc farmer
I currently have 2 curing chambers, both small GE chest freezers.

The following kit has everything needed (except the one pound of silica gel for dehumidification) to control temperature and humidity....NO drilling and NO cutting!!!!!!!!!!!!

http://www.perfect-cheese.com/total-conditioning-package

I haven't had to humidifify the chambers, only dehumidify...that's easily done via a silica gel pillow placed on top of the fan cube.

http://www.perfect-cheese.com/high-humidity
Nice, thanks.

How do you hang in it? 
 
I currently have 2 curing chambers, both small GE chest freezers.

The following kit has everything needed (except the one pound of silica gel for dehumidification) to control temperature and humidity....NO drilling and NO cutting!!!!!!!!!!!!

http://www.perfect-cheese.com/total-conditioning-package

I haven't had to humidifify the chambers, only dehumidify...that's easily done via a silica gel pillow placed on top of the fan cube.

http://www.perfect-cheese.com/high-humidity


Looks like a good set up. Can we assume you are just running the sensor probe into the freezer between the door and the cabinet? What's the highest temps you cure stuff at?

By far the cheapest all inclusive plug n play system I've seen.
 
Last edited:
What's the advantages/disadvantages to using a freezer or refrigerator? I've seen both used but no real explanation in on why one is better than the other
 
Either can be used.
I use the chest freezer because I also make cheese, so I can fill the bottom of the freezer with cheese.
The freezer is simple, no serious issues with condensation that some folks complain about with some fridges.
 
As of now I use an older wine fridge that has issues with condensation. I'm constantly having to open the door each day to allow new air in and what not. I've got a spare fridge in the garage already...I'm just waiting on help to get it into my basement. Then it'll become my curing chamber setup. 
 
Either can be used.
I use the chest freezer because I also make cheese, so I can fill the bottom of the freezer with cheese.
The freezer is simple, no serious issues with condensation that some folks complain about with some fridges.

Good to know. Small chest freezers are cheap even new. Easier to hide under piles of stuff in the garage too!

I'd like to hear more about your cheese making Martin. have you posted that info anywhere?
 
Either can be used.
I use the chest freezer because I also make cheese, so I can fill the bottom of the freezer with cheese.
The freezer is simple, no serious issues with condensation that some folks complain about with some fridges.

Good to know. Small chest freezers are cheap even new. Easier to hide under piles of stuff in the garage too!

I'd like to hear more about your cheese making Martin. have you posted that info anywhere?

No, I haven't posted anything about cheesemaking in many years.
Best to get a really good good to do it right...there's a lot to know.

 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky